Browse the guide

Team & User Permissions

Invite your staff, give each person exactly the tools their job needs, and keep the money views scoped to what they should see.

What it is

My Team lists the people who can sign in to your Merchant360 account and sets what each one can do: a role, the tools they can open, the card reader they charge on, and whether they see only their own sales.

Who it's for

The account owner. Only the owner can add, change or remove people; everyone else sees the list.

Before you start
  • You are signed in as the account owner.
  • Your own mobile number is verified under Login/Account Security. Every team change asks for a code.
  • The email address the person will sign in with.
On this page

Add people

Pick a role, send the invite, confirm with a code.

Roles - the starting point

Every person on My Team has one role, picked from the role cards under Add a person. The role sets the broad shape of what they can do; Change access, described later, narrows it tool by tool.

  1. 1Open Account → My Team.
  2. 2Under Add a person, type the Email address and, optional, the Mobile number for their security codes.
  3. 3Under What can this person do?, click a role card: Clerk, Accountant, Manager, Owner, Billing tools only or Register only. Each card lists Can and Cannot lines.
  4. 4Optional: TableTurn register PIN (optional) is a 4-digit code for the TableTurn register only. It is not used on Merchant360 Terminal.
  5. 5Press Send invite, type the code sent to you, and press Confirm invite.
  6. 6To give someone a different role later, add the same email again under Add a person with the new role.
Good to know

Each card says what that person can and cannot do, money first. Owner has everything, including the bank account, the Developers page, and who is on the team. Manager can refund, charge typed-in and saved cards, and see deposits, but cannot change the bank account, pay vendors, or add people. Accountant sees deposits, statements, and sales and sends invoices, payment links, and credit memos, but cannot refund or charge a card. Clerk takes payments on the card reader and sees sales and deposits, but cannot refund, type in a card, or invoice. Billing tools only starts with nothing and gets exactly the tools you tick. Register only signs in to the TableTurn register and never sees Merchant360.

Pick the smallest role that covers the job. A bookkeeper is an Accountant. A front-desk person who only sends invoices is Billing tools only with Invoices ticked. Someone who runs the shop when you are away is a Manager.

Adding anyone asks for a security code sent to you. The person receives an email with a link to create their own password, and the same email asks them to add their mobile number so they can receive their own codes.

A role is set when you add the person. To give someone a different role, add the same email again under Add a person with the new role. If the invite email did not arrive, remove the invite from their row and add them again.

On this screenWhat it does
Add a personThe form for a new person, under People on this account.
Email addressWhere the invite link is sent. It becomes the person's login.
Mobile number (optional)The number that will receive the person's own security codes. Optional when you add them, needed before they can do anything that asks for a code.
Role cardsClerk, Accountant, Manager, Owner, Billing tools only, Register only. Each card lists Can and Cannot lines.
TableTurn register PIN (optional)Shown with the TableTurn mark. A 4-digit code for signing in on the TableTurn register. Not used on Merchant360 Terminal.
Enter the code to send the invite / Confirm inviteEnter the six-digit code sent to you, then Confirm invite sends the email. Resend code sends another code; Back returns to the form.
Invite sent, not signed in yetMarks a person in People on this account who has not finished setting up.
People on this accountEveryone on the account, with their role and a Security codes ready or no mobile note.
RemoveTakes away the person's access after you enter a security code.
If something goes wrong
Enter their email address first.
Type the email before you press Send invite.
Only the account owner can invite team members.
Sign in as the account owner.
The invite email did not arrive
The row reads Invite sent, not signed in yet. Press Remove, then add the person again.

The Billing Tools only user

Billing tools only is the role for someone who should reach a few specific tools and nothing else. It grants nothing on its own. When you pick it under Add a person, More options opens by itself; tick the tools the person may use, and only those appear in their menu.

  1. 1Under Add a person, click the Billing tools only card. More options opens with Billing tools only starts with nothing. Tick the tools this person may open.
  2. 2Under Tools they can open, tick each tool the person may use.
  3. 3Press Send invite and confirm with your code.
  4. 4After they sign in, their menu shows only the tools you ticked. Press Change access on their row to change them.
Good to know

Use it for a receptionist who sends invoices, a bookkeeper who only exports transactions, or an outside assistant who runs the virtual terminal. Because the role starts empty, adding someone with it is safe by default. Ticking Virtual terminal also lets them refund.

A Billing tools only user never sees Account, Security, My Team, or Developers. They cannot change settings, and their view of Transactions can be limited with Only show them their own sales.

You are done when the person signs in and their menu shows exactly the tools you ticked. Press Change access on their row to change it at any time.

If the person reports an empty menu, no tools have been ticked yet. Press Change access on their row and tick at least one.

On this screenWhat it does
Role card: Billing tools onlyCreates a user with no tools. Tick tools under More options or Change access.
More optionsOn the Add a person form. Opens the tool list so you can grant access as part of the invite.
Change access (per person)The tool list, card reader choice, and Only show them their own sales for that person.
Tip
This is the right choice for front-desk staff at a practice or clinic: give them the terminal, keep everything else off.
If something goes wrong
The person's menu is empty
No tools are ticked yet. Press Change access on their row, tick at least one, and press Save access.

Why we text you a code

Certain changes can give someone else access to your account or move your money, so Merchant360 confirms it is really you before they go through. It texts a six-digit code to the mobile number on your profile and asks for it. Inviting a teammate, removing one, turning billing tools back on, creating an API key, connecting the Payment Extension, and changing Large refunds all ask for a code.

  1. 1Send invite sends the code for you, and the next screen says where it went.
  2. 2On other protected changes, such as Remove, the code box shows where the code goes. Press Text me a verification code, or Email me a code instead.
  3. 3Type the 6-digit code. You can also enter the 6-digit code from your authenticator app, or a backup code.
  4. 4To remove someone: press Remove on their row, get the code, type it and press Yes, remove. They lose access to this business only.
Good to know

The code goes to the number under Account, Login & security, which is the same number used for sign-in verification. Keep it current; if you change phones, update the number while you still have the old one.

Every teammate has their own number for their own codes. A person without a mobile number on file cannot complete any action that needs a code, and their row on My Team shows this. You can add their number for them with Add mobile on their row until they verify their own.

If the code does not arrive within a minute, use Resend code. If it never arrives, check the number on the Security page and make sure your phone can receive texts from short codes. Codes expire after a few minutes, so request a new one rather than reusing an old text.

On this screenWhat it does
Text me a verification codeSends the six-digit code to the mobile number on your profile.
6-digit code fieldEnter the code from the text. The action completes as soon as it is accepted.
Resend codeSends a fresh code if the first did not arrive.
Security codes ready / no mobile (My Team)Each teammate's entry shows whether they can receive codes. Add mobile lets the owner enter a number until the person verifies their own.
If something goes wrong
Wrong code
Check the newest text and type the 6 digits again.
Too many attempts. Request a new code.
Press Resend code for a new one.
Enter the 6-digit security code, or a backup code like K7QM-4TZP.
Type the 6 digits, or a backup code with its dash.
No mobile number on file – set up phone verification first so we can text you security codes.
Verify your mobile under Login/Account Security, then try again.

Control what each person can do

Change access on a person's row, at any time.

Tool access - per-person module control

Change access is the button on each person's row in My Team. It opens right under the row with every tool as a checkbox, each with one line saying what it does, plus the card reader choice and Only show them their own sales. Ticked tools show in that person's menu; unticked tools are hidden from them.

  1. 1Open Account → My Team. Under People on this account, press Change access on the person's row. The owner's row has no Change access.
  2. 2Under Tools they can open, tick the tools the person may use and untick the rest. Each tool has one line saying what it does.
  3. 3Press Save access. The panel reads Saved.
Good to know

It works with every role. A Manager already sees everything, so unticking a tool hides it from that manager. A Billing tools only user sees nothing until you tick tools. Owners always see everything and have no Change access button.

Press Save access to apply the change; the panel shows Saved. The person does not need to sign out; the menu updates on their next click. Tools that are not on the list keep whatever access they already had.

The list covers the tools people are usually split on: virtual terminal, card reader, saved cards, invoices, reservations, payment links, recurring billing, credit memos, inventory, scheduling, staff schedule, transactions, reports, statements, exports, checkout pages, and the register.

If a person still sees a tool you unticked, ask them to reload the page. If a tool you expect is missing from their menu after you tick it, it is not turned on for your account; your account manager can enable it.

On this screenWhat it does
Tools they can openOne checkbox per tool, each with a one-line explanation. Ticked means the tool shows in that person's menu and they can use it.
Card readerAny card reader in the office, or Only this card reader. Covered in the next section.
Only show them their own salesLimits Transactions and reports to payments the person took themselves. Covered later in this chapter.
Save access / SavedSave access stores the change; Saved confirms it.
If something goes wrong
Couldn't save. Please try again.
Press Save access again. If it keeps failing, reload the page.
The owner always has full access.
Owners cannot be limited. Pick another role for anyone who should have less.
The person still sees a tool you unticked
Ask them to reload the page.

Merchant360 Terminals - any device, or locked to one

If you take card-present payments with Merchant360 Terminals, the Card reader choice under each person's Change access decides which reader they can send a charge to. It shows once Card reader (Merchant360 Terminal) is ticked. This matters when you have more than one reader, for example one at each register or one per delivery driver.

  1. 1Press Change access on the person's row and tick Card reader (Merchant360 Terminal).
  2. 2Under Card reader, choose Any card reader in the office, or Only this card reader: and pick the reader under Pick a reader.
  3. 3Press Save access.
Good to know

Any card reader in the office lets the person pick from the account's readers each time they charge. Only this card reader pins them to one reader, picked by name, so the charge always goes to that device and the picker is skipped.

Pin a person to one reader when they always work the same station, or when a reader travels with them. Leave it on any card reader for managers who float between stations.

If a person cannot find their reader in the picker, the reader is not set up on the account yet. If a pinned person reports charges going to the wrong reader, their Change access points at a different device; pick the right one and press Save access.

On this screenWhat it does
Any card reader in the officeThe person sees a picker of the account's Merchant360 Terminals on every card-present charge.
Only this card readerPick the reader by name. Every card-present charge from this person goes to that reader with no picker.
If something goes wrong
Pick the card reader, or switch back to any card reader.
With Only this card reader: chosen, pick a reader before you save.
Enter the Merchant360 Terminal serial to pin this user to it.
Pick the reader from the list so its serial is filled in.
Related articles

Only their own activity

Only show them their own sales is a checkbox under each person's Change access, and under More options when you add someone. It is on by default for new people. When it is on, the person's Transactions, deposits, and reports show only the payments they took themselves. Payments taken by anyone else on the account are not listed for them.

Use it for sales staff who should see their own sales but not each other's, or for an outside assistant who processes payments but should not see your full revenue.

Because the person cannot see a colleague's payment, they cannot open it to refund or void it either. Owners always see everything, and the setting does not apply to the owner.

If a person needs to work with a payment a colleague took, untick it for them and press Save access, or have a manager handle it.

  1. 1Press Change access on the person's row.
  2. 2Tick Only show them their own sales to limit their Transactions, invoices and card volume to what they ran or created. Untick it to show everything their tools allow.
  3. 3Press Save access.
On this screenWhat it does
Only show them their own salesOn or off. On limits Transactions, deposits, and reports to the person's own payments.
Tip
Only show them their own sales is ticked for every new person you add, unless you untick it under More options.