Browse the guide

Merchant360 Terminal

The PAX A920 terminal with the Merchant360 Payment App: sales keyed on the terminal and sales sent from Merchant360, cash, gift cards, Text to pay, tips, servers, voids, refunds, batch close, reports, appointments and every setting.

Applies to app version 2.47.31 · updated Nov 16, 2026

What it is

The Merchant360 Terminal is a PAX smart terminal running the Merchant360 Payment App. It takes chip, tap and swiped cards, records cash, runs gift cards, texts pay links and prints receipts. Sales can be keyed on the terminal or sent to it from Merchant360 or your POS.

Who it's for

Businesses with a counter, a front desk or tables: retail, restaurants, salons, medical offices and service shops. Owners and managers set it up; clerks and servers ring sales on it.

Before you start
  • A Merchant360 Terminal from Electronic Payments.
  • The 8-digit activation code for the terminal (see Connect the terminal).
  • Wi-Fi or cellular data for the terminal. Card sales need internet unless store and forward is on for your account.
  • The supervisor PIN, if your business protects actions such as voids and refunds. Electronic Payments sets it.
On this page

Set up the terminal

Get a terminal, connect it to your account, and decide who can use it.

What the Payment App is

The Merchant360 Terminal is a PAX A920 smart terminal running the Merchant360 Payment App. It takes chip, tap (including Apple Pay and Google Pay) and swiped cards, records cash, runs Merchant360 gift cards, texts pay links, and prints receipts on the terminal's printer. A terminal without a printer (PAX A77 and A800) sends receipts by email or text. The card is read on the terminal; card data does not pass through your computer or through Merchant360.

In Standalone mode, the start-up mode, the same terminal takes sales keyed on it and sales sent from Merchant360: the Merchant360 Terminal page, the Chrome extension and the Merchant360 API. There is no setting to change between the two. See Send a sale from Merchant360.

Integrated mode is for a dedicated terminal that only takes sales sent from Merchant360 or a POS: the start screen is Ready for payments, with no keypad. See Integrated mode.

POS Listener mode (app 2.43.0) is a bare screen for a terminal run by your POS: your logo, a message such as Ready for Payment, and nothing else. Sales come only from your POS or Merchant360. See POS Listener mode.

The terminal's settings (pricing program, tips, tax, receipts, prompts, which actions need a supervisor PIN, the item list) are kept in Merchant360. Some you change on the terminal under Settings or on the Terminal settings page in Merchant360; the rest are set by Electronic Payments or your sales office. Settings reference lists each one and where it is changed.

A change saved in Merchant360 reaches the terminal at once. The terminal also checks for changes every 3 minutes and keeps a copy in its own memory, so it opens at once and keeps working when the network drops.

The terminal is locked to the Merchant360 Payment App: it opens on the app, and the Android status bar, Home and Recent keys are off. Wi-Fi and Sound open from Settings. Exit to Android in Settings is for Electronic Payments technicians and needs their PIN.

Card sales reach your Merchant360 transactions through the processor. Cash sales are sent by the terminal and show on the Transactions board with the cash icon.

The terminal keeps the last 7 days of transactions for History and Reports. Older days are in Merchant360 → Transactions.

The Sale screen of the Merchant360 Payment App with an amount and the Card and Cash buttons
The Sale screen: key the amount, then Card, Cash or Gift Card. Each button shows the total for that tender, with its tax.
On this screenWhat it does
Sale screenThe start screen in Standalone mode: the amount, the tender buttons and the number panel.
Three lines (top left)Opens the Main Menu.
Logo (top center)Switches to the item grid, or to Fuel, Service or Sale, when they are set up. Your provider's logo shows here when their brand is set.
Gear (top right)Opens Bypass Tax and Waive Fee for this sale.
Logo (other screens)On the Main Menu, History, Reports, Settings, About, Appointments, Gift card menu and the amount screens, tap the logo to go straight back to your start screen (Sale or Items). It does nothing while a card or a payment is in progress (app 2.43.23).
Ready for paymentsThe start screen in Integrated mode. See Integrated mode.
Ready for Payment (waiting screen)The start screen in POS Listener mode: your logo, the message and your software partner's logo. Hold the logo 3 seconds for the Main Menu. See POS Listener mode.
From Merchant360Shown on the terminal for a sale sent from Merchant360, in either mode. See Send a sale from Merchant360.
Tip
Settings reference, at the end of this chapter, lists every setting with its choices, its default and where it is changed.

Getting a terminal

If your account does not have a terminal yet, the Merchant360 Terminal page reads Add a card reader. When your sales office allows it, you order the terminal on that page: pick the device, confirm the shipping address, and place the order. After the terminal ships, Electronic Payments activates it on your account and the sale form opens on the page. When orders go through your sales office, the page shows the office's phone and email instead.

Turn the terminal on, connect it to Wi-Fi (Settings → Wi-Fi) or use its cellular connection, and it opens the Merchant360 Payment App. Connect the terminal covers the activation code. The terminal is listed in the Terminal picker once it is online.

Electronic Payments support is at (800) 966-5520 for an order, an activation, or a terminal that is not connecting.

The Merchant360 Terminal page with no terminal yet: Add a card reader, the PAX A920 at $248.75 with free shipping, and Order Now
With no terminal on the account, the Merchant360 Terminal page offers one to order.
On this screenWhat it does
Add a card readerThe page before a terminal is on the account. Shows the order form when your office allows ordering, or the office's contact details.
DeviceWhich terminal ships, with your price.
Ship toRecipient, address and phone for the shipment. The address is checked before the order is placed.
Place orderPlaces the order. Electronic Payments activates the terminal after it ships and the sale form opens.

Connect the terminal

Each terminal is connected to your Merchant360 account once. Electronic Payments gives you an 8-digit activation code for the terminal (emailed when the terminal is set up, valid for 7 days; a code made later on the terminal's row is valid for 30 minutes). The code works once.

Before you start
  • The 8-digit activation code from Electronic Payments. A code emailed when the terminal is set up is good for 7 days; a code made later on the terminal's row is good for 30 minutes. Each code works once.
  • The terminal is on Wi-Fi or cellular data.
Steps
  1. 1Turn on the terminal. A terminal that is not connected opens on Connect to Merchant360. To connect again later (for example after a disconnect), press the three lines at the top left of the Sale screen to open the Main Menu, then Settings, then Connect to Merchant360. Enter the supervisor PIN when the terminal asks for it.
  2. 2Key the 8 digits on the number panel and press Connect.
    The Connect to Merchant360 screen with eight digit boxes and the number panel
    Key the 8-digit code on the number panel, then Connect.
  3. 3The terminal goes to its start screen and loads its settings at once. Settings → Connect to Merchant360 shows Connected to and your business name.
Good to know

A terminal that is not connected opens on Connect to Merchant360 when the app starts, with your logo (or your agent's logo) at the top. After you connect, the terminal goes to its start screen.

The page shows the terminal's serial number and its state: Connected to and your business name, or Not connected. Gift cards need this connection. Tips, Sales tax, Receipts, Loyalty and Cash and sale prompts show in Settings only while the terminal is connected.

If the screen shows Could not reach Merchant360, the terminal has no network: check its Wi-Fi or cellular signal (Settings → Check connection) and try again. A disconnected terminal needs a new code.

On this screenWhat it does
Connected to (business name)The terminal is connected to your Merchant360 account.
Not connected. Gift cards need this connection.The terminal has no Merchant360 login. Gift cards, appointments, Text to pay and the business settings pages are not available.
Serial numberThe terminal's serial number, sent with the code.
Enter the 8-digit activation codeEight boxes filled from the number panel.
ConnectSends the code with the terminal's serial number. On success the terminal stores its own login and loads its settings.
Disconnect this terminalRemoves the terminal's login. Gift cards and settings updates stop until it is connected again with a new code.
If something goes wrong
Could not reach Merchant360
The terminal has no network. Check its Wi-Fi or cellular signal under Settings → Check connection and try again.
The terminal was disconnected
A disconnected terminal needs a new activation code. Ask Electronic Payments for one.

Name your card readers

Each terminal is known by its serial number. The Card readers card under Billing tools → Settings lists every terminal on your account and gives each one a name and a location, so a front desk with three terminals picks Front desk, Exam room 2 or Parts counter instead of a ten-digit serial. The name shows wherever a terminal is chosen: the Merchant360 Terminal page, the register, the payment extension, the embedded terminal, Team device access and the terminal's line on a transaction.

The card also holds the default. The default terminal is preselected on the Merchant360 Terminal page and is the one an integration charges when it does not name a terminal. Each row shows the serial, the model and when the terminal was last seen; a terminal that is off stays on the card with its name.

Names stay in Merchant360 and are not printed on receipts. Clearing both fields and saving puts the terminal back to its serial.

  1. 1Go to Billing tools → Settings and find the Card readers card in the Payments group.
  2. 2Type a name and, if needed, a location for each terminal, then press Save on that row.
  3. 3Press Make default on the terminal most sales go to.
  4. 4If a terminal is missing, turn it on and connect it, then press Refresh terminal list.
On this screenWhat it does
Card readers card (Billing settings, Payments group)Lists every terminal on the account with its serial, model and when it was last seen.
NameThe label shown wherever a terminal is picked. Saved in capitals. Blank falls back to the serial.
LocationOptional second part of the label, shown after the name: Front desk · Suite 200.
SaveSaves the name and location for that terminal. Greyed out until something changed.
Make defaultMakes this the terminal the Merchant360 Terminal page preselects and the one an integration charges when it does not name a terminal. One default per account.
Refresh terminal listReads the terminal list again and records when each was first and last seen.
Tip
Team members locked to one terminal pick it from this list by name, so name the terminals before you set up device access.

Do this with the API:Readers (devices)

Who can use the terminal

Access to the Merchant360 Terminal page is a tool on each team member's row under Team: Merchant360 Terminal (card present). Clerks and above can have it. Register-only staff cannot reach the back office through it.

With several terminals, each person with terminal access either chooses any terminal when sending a sale or is locked to one terminal, picked by the name on the Card readers card. A locked person sees only that terminal in the picker, and in the Chrome extension they connected, which then sends the sale straight to it.

Invite a teammate: what each role can do with money, with Owner, Manager, Accountant, Clerk, POS Only and Billing tools
Account → Team: the Clerk role takes payments on the countertop terminal.
On this screenWhat it does
Card reader (Merchant360 Terminal)The tool checkbox under Change access on a person's row in My Team that grants the Merchant360 Terminal page.
Any card reader in the office / Only this card readerWhether the person picks a terminal when sending a sale or is locked to one, chosen by name from the Card readers card. A locked person sees only that terminal in the picker.

Switch merchant

A terminal can be linked to more than one of your merchant accounts (for example two businesses sharing a counter). Electronic Payments sets up the link; the terminal takes payments for one merchant at a time.

While a terminal is linked to more than one merchant, a colored bar under the logo on the start screen shows Taking payments for and the merchant's name, with the last 4 digits of its MID. Each merchant has its own color.

Each merchant keeps its own MID, batch, transaction history, reports and settings. Sales already taken stay with the merchant they were taken for. The switch is refused while offline sales are still stored on the terminal: connect it to the internet and wait for them to send first.

Before it switches, the terminal sends what it still has waiting for the current merchant: cash sales, loyalty points and punches, appointment payments and stock changes (app 2.43.6). It does not switch while any of them are left, so none of them is recorded on the other merchant. The page then says, for example, 2 cash sales or other updates for Main Street Cafe are waiting to be sent to Merchant360. Connect to the internet and wait for them to send, then switch.

While the switch runs, a waiting screen covers the page (app 2.43.7): Sending waiting sales for and the current merchant's name, then Moving this terminal to and the new merchant's name, with This can take up to a minute. Do not turn the terminal off. and the seconds so far, then Done. Restarting for and the new merchant's name.

  1. 1On the Sale screen, press the three lines at the top left to open the Main Menu, then Settings. Enter the supervisor PIN.
  2. 2Press Switch merchant. The page lists the linked merchants; Active now marks the current one.
  3. 3Press the merchant to switch to. The page says where the next sales go and that sales already taken stay with the current merchant.
  4. 4Press Switch to and the merchant's name. The waiting screen shows each step; leave the terminal on. The app restarts on that merchant (about a minute). The start screen shows Now taking payments for and the merchant's name.

Take a payment on the terminal

Card, cash, keyed and pre-auth sales, tips and the other ways to get paid at the counter.

Take a card sale

Key the amount and press Card. Before the card is read, the terminal shows the steps your settings call for, in this order: the Loyalty page (phone number for rewards), the supervisor PIN, the invoice number, the clerk or server ID, the tip, and a Confirm Sale screen when your pricing program uses one. Back on any step returns to the step before it.

Before you start
  • The terminal is connected to Merchant360 and online. Card sales need internet unless store and forward is on for your account.
Steps
  1. 1On the Sale screen, key the amount on the number panel. Each tender button shows its own total with its tax.
    The Sale screen with an amount and the Card and Cash buttons
    Key the amount. Each button shows its total with tax.
  2. 2To skip tax or a fee on this sale, open the gear at the top right and press Bypass Tax or Waive Fee (when your settings allow them).
    The Sale screen with the gear drawer open showing Bypass Tax and Waive Fee
    The gear opens Bypass Tax and Waive Fee.
  3. 3Press Card.
  4. 4Answer the steps your settings call for, in this order: the Loyalty page, the supervisor PIN, the invoice number, the clerk or server ID, the tip, and Confirm Sale when your pricing program uses one. Back returns to the step before.
    The Loyalty page: Phone number for rewards, with Skip, Swipe card and Continue
    With Ask for loyalty phone on, the Loyalty page comes first.
    Enter Invoice Number: Enter the invoice number to proceed, with the number panel
    With invoice entry on, the invoice number comes next.
  5. 5Hand the terminal to the customer to insert, tap or swipe the card.
  6. 6When the sale is approved the receipt step opens. Print, email or text the receipt, then press Back to Home.
    The Sale Receipt screen with Reprint Merchant Receipt, Print Customer Receipt, Email/SMS Receipt and Back to Home
    The receipt step after an approved sale.
Good to know

Each tender button shows its own total with its tax. For example, with 8.75% sales tax and a 3% surcharge, a $24.50 sale shows Card $27.44, Cash $26.64 and Gift Card $26.64, each incl. $2.14 tax, and Text to pay $26.64 above them. A $6.00 tip on the card makes the charge $33.44: the surcharge is not added to the tip unless Electronic Payments turns that on.

With a pricing program on, the Card and Cash buttons show different totals: Dual Pricing shows the card price on Card and the cash price on Cash, a surcharge is added to credit cards (A N% Surcharge is added to credit cards. Debit cards are never surcharged.), and an admin fee is added on every tender with the name your business uses for it.

The customer inserts, taps or swipes when the screen says Please, insert, or swipe the card on the reader. With Go straight to the receipt prompt on (the default), an approved sale goes to the receipt step at once. Otherwise, and for every sale that does not go through, the result screen shows the status, the amount, Invoice Id, Date, Approval Code and Card Number; Next goes to the receipt screen.

A sale below your minimum or above your maximum cannot proceed; the screen shows the limit, for example Maximum sale amount is $5,000.00.

While the terminal waits for the card, Cancel at the bottom of the screen stops the reader and ends the sale: the terminal returns to its start screen with nothing keyed. The back arrow stops the reader and returns to the Pay screen with the amount kept, for example to take cash instead.

Card sales need internet. With no connection the terminal does not charge the card: the result reads Transaction Failed with the status Internet Offline - NI (no network) or Internet Offline - SR (the card reader could not reach the processor), and The card was not charged. Press Next, then take cash or try again when the terminal is back online. Settings → Check connection shows what is missing.

Store and forward, when Electronic Payments turns it on for your account: with no connection the terminal still takes the card, stores the sale and sends it when it is back online. The screen says Internet offline. Insert, tap or swipe the card to store this sale, the result says Stored offline. Sent when the terminal is back online, and the receipt prints STORED OFFLINE: SENT WHEN ONLINE. There is a limit per sale ($100.00 unless set otherwise) and a limit on the total waiting to be sent ($500.00 unless set otherwise); above either, the terminal says so and the card is not stored. A stored sale can still decline when it is sent, after the customer has left; it then shows as Declined in History.

In Training mode the Gift Card and Text to pay buttons do not show.

Debit, when Electronic Payments turns on PIN debit: a slim Debit button sits under the amount. The customer enters the PIN on the terminal's secure PIN pad.

On this screenWhat it does
Number panelKeys the amount from the right: 2, 4, 5, 0 makes $24.50. C clears; the arrow deletes the last digit.
CardStarts a card sale for the card total shown on the button (incl. $X tax).
CashRecords a cash sale for the cash total. Shown when Take cash is on.
Gift CardRedeems the amount on a Merchant360 gift card. Shown when gift cards are on for the terminal.
Text / Text to pay $XTexts the customer a pay link. Shown when Text to pay is on; a slim button under the amount when all four tenders are on.
DebitA PIN debit sale on the secure PIN pad. Shown when PIN debit is turned on for your account.
Gear: Bypass TaxRemoves the sales tax from this sale. Grey unless Allow tax bypass and Add sales tax to each sale are on. The banner reads Tax exempted.
Gear: Waive FeeRemoves the surcharge, dual pricing difference or admin fee from this sale. Grey unless Allow fee bypass is on. The banner reads Fee waived.
Loyalty pagePhone number for rewards, with Skip, Swipe card and Continue to payment. Shown first when Ask for loyalty phone is on.
Enter Supervisor PINShown when Sale is protected.
Enter Invoice NumberShown on card sales when invoice entry is Keyed by the clerk: up to 20 digits. A number already used today is refused (Invoice number N has already been used today). With Allow a blank invoice number, Continue with the field empty and the terminal makes the number.
Enter Server ID / Clerk ID / Operator IDShown when Ask for a clerk ID is on. See Servers and clerks.
Tip screenShown on card sales when tips are On screen. See Tips.
Confirm SaleSale Amount, Tip, Tax, Fee and Total with Cancel and OK. Shown when your pricing program uses a confirmation screen.
Please, insert, or swipe the card on the reader.The card screen. The customer inserts, taps or swipes.
Cancel (card screen)Stops the card reader and ends the sale. The terminal returns to its start screen.
Back arrow (card screen)Stops the reader and returns to the Pay screen with the amount kept.
Result screenSale Successful, Transaction Declined, Transaction Failed or Transaction Cancelled, with the amount, Invoice Id, Date, Approval Code, Card Number and Status. Next goes to the receipt screen; Back to Home to the start screen.
Status Internet Offline - NI / - SRThe sale did not go through for lack of a connection. The card was not charged.
Stored offline. Sent when the terminal is back online.Store and forward kept the sale to send later. The receipt prints STORED OFFLINE: SENT WHEN ONLINE.
No internet, and the card reader did not store this sale offlineStore and forward is on, but the card reader refused to store the sale; the reason follows (for example, Handpoint does not allow store and forward for the terminal yet). The card was not charged.
Starting the card reader againAfter the internet comes back, the terminal starts the card reader again before the sale. It also does this by itself when the network returns, and on Retry; no restart is needed.
If something goes wrong
Transaction Failed with Internet Offline - NI or Internet Offline - SR
The terminal could not reach the processor, and the card was not charged. Press Next, then take cash or try again when the terminal is back online. Settings → Check connection shows what is missing.
Maximum sale amount is $5,000.00 (or a minimum)
The amount is outside your business's sale limits. Change the amount, or ask Electronic Payments about the limit.
The customer wants to pay another way
While the terminal waits for the card, the back arrow returns to the Pay screen with the amount kept, for example to take cash. Cancel ends the sale.

Do this with the API:Card-present sale

Tips

Tips are a setting for your business: Ask for a tip, and Where the tip is added, On screen (the customer picks the tip on the terminal before the card) or On the receipt (the customer writes it on the paper receipt and the clerk adds it later with Tip Adjustment). Change them on the terminal under Settings → Tips or in Merchant360 Terminal settings.

Steps
  1. 1Main Menu → Settings (supervisor PIN) → Tips.
  2. 2Turn on Ask for a tip.
  3. 3Choose On screen or On the receipt.
    The Tips settings on the terminal
    Settings → Tips on the terminal.
  4. 4Turn on Show tip suggestions and tap each Suggestion to change its percent (1 to 100); Add a suggestion adds one, up to 4.
  5. 5Tap Maximum tip to change the limit.
Good to know

On screen, the tip screen comes after the invoice number and the clerk ID and before the card. It shows the sale title and amount, No Tip, up to four suggestions and Custom Tip. Each suggestion reads like 15% Tip with the dollar amount under it. There is no Continue button: tapping No Tip or a suggestion chooses it and goes on to the card.

The tip percentages are figured on the sale amount before tax and fees, after a loyalty reward comes off. On a $24.50 sale with $2.14 tax, 15% is $3.68, 18% is $4.41, 20% is $4.90 and 25% is $6.13.

Custom Tip opens a keypad. The screen shows the tip and the percent of the sale it makes, for example $6.00 and 24.5% of $24.50; Continue goes on to the card. A tip above the maximum tip (50% unless your business sets another) shows Tip exceeds max of 50% and cannot be used.

The tip screen shows on card sales only: a Card sale, a Keyed Sale, a gift card redeem and a pre-auth completion. Cash sales have no tip screen.

On a sale sent from your POS, the POS can turn the tip screen on or off for that sale, whatever Ask for a tip is set to (app 2.43.2). A sale that saves the card and a pre-auth sent from your POS have no tip screen.

A surcharge is not added to the tip unless Electronic Payments turns on Surcharge applies to tip. A percentage admin fee includes the tip only when Admin fee applies to tip is on.

On the receipt: the merchant copy prints Suggested tip with each suggestion and its amount (when suggestions are on), and blank Tip and Total lines for the customer to fill in. The clerk then adds the written tip in History → the sale → Tip Adjustment, within 24 hours and before the batch closes.

Tips show on the receipt, in History (Tip on each row, and the Tipped and Untipped filters) and in the Tip Report, which can be run for one server.

The tip screen for a $24.50 sale: No Tip, 15% Tip $3.68, 18% Tip $4.41, 20% Tip $4.90, 25% Tip $6.13 and Custom Tip
The tip screen: each suggestion shows the tip in dollars. Tapping one chooses it and goes on to the card.
Custom Tip with $6.00 keyed, 24.5% of $24.50, and Continue
Custom Tip: key the tip; the screen shows what percent of the sale it is.
On this screenWhat it does
No TipNo tip on this sale. Goes on to the card.
15% Tip $3.68 (a suggestion)Adds that percent of the sale amount (before tax and fees) and goes on to the card.
Custom TipA keypad for any tip, with the percent of the sale under it (24.5% of $24.50). Continue goes on to the card.
Tip exceeds max of N%The tip is above the maximum tip. Pick a lower one.
Back arrowReturns to the step before the tip.
Settings → Tips: Ask for a tipTurns the tip on or off for card sales. Terminal and Merchant360.
Where the tip is added: On screenThe customer picks the tip before the card.
Where the tip is added: On the receiptThe customer writes the tip on the receipt; add it later with Tip Adjustment, before the batch closes.
Show tip suggestionsShows the suggestion buttons. Off: No Tip and Custom Tip only.
Suggestion 1 to 4Each a whole percent from 1 to 100. Add a suggestion adds one, up to 4. Default 15, 18, 20 and 25 unless your account was set otherwise.
Maximum tipThe largest tip accepted, as a percent of the sale. Default 50%.

Do this with the API:Tips on the reader

Servers and clerks

The terminal records who took each sale with a clerk ID: a number from 1 to 4 digits that each server or clerk keys on the sale. There are no clerk accounts or log-ins to set up: any number the staff member keys is recorded, so give each person their own number.

Turn it on with Ask for a clerk ID (Settings → Cash and sale prompts, or Merchant360 Terminal settings). The prompt is called Clerk ID, Server ID or Operator ID, as your business chooses; this guide says clerk ID for all three.

The prompt Enter Server ID (or Clerk ID, Operator ID) shows four boxes and Enter your Server ID to proceed. A number of all zeros is refused (Only zeros is not a valid Server ID). With Allow a blank clerk ID on, the subtitle says (optional) and Continue works with the boxes empty.

The clerk ID is asked on card sales, cash sales and keyed sales, after the invoice number and before the tip, and on voids and refunds.

Where the clerk ID shows: on the receipt (Server ID: 12), on the transaction in History (Clerk), in the History filter Clerk ID, and on every report except Tax Only, which can be filtered by the ID (the filter uses your label, for example Server ID (optional)). Cash sales send the clerk ID to Merchant360 with the sale.

Reports on a terminal cover the sales taken on that terminal. A server who works on two terminals has a report on each.

A report filtered by a number never used on this terminal shows No clerk with ID "12" found for this merchant.

  1. 1End of shift: Main Menu → Reports → Credit / Debit Card Reports → Tip Report.
  2. 2Press Filter, pick the date, key the server's ID in Server ID (optional) and press Continue.
  3. 3Read Total Tips, Total Tip Adjustments and Tipped Transaction Count, and press Print Report for a paper copy.
  4. 4Run the Short Report or Totals Only with the same filter for the server's sales.
The card Tip Report: Tip Breakdown with Total Tips at Sale, Total Tip Adjustments and Average Tip, and Summary with Tipped Transaction Count, Total Tips, Total Voided Tips and Overall Tips
The card Tip Report. Filter it by a server's ID for that server's tips.
Enter Server ID: Enter your Server ID to proceed, with four digit boxes and the number panel
Enter Server ID: up to 4 digits.
On this screenWhat it does
Ask for a clerk IDTurns the clerk ID prompt on. Off by default. Terminal (Cash and sale prompts) and Merchant360.
Clerk ID / Server ID / Operator IDWhat the prompt, the receipt and the reports call it. Default Clerk ID.
Allow a blank clerk IDContinue works with no ID. Off by default.
Four digit boxesThe ID, 1 to 4 digits. C clears.
ContinueRecords the ID for this transaction and goes on.
Only zeros is not a valid Server ID0, 00, 000 and 0000 are refused.
Receipt line Server ID: 12Prints on the merchant and customer copies.
History filter Clerk IDLists the card transactions of one clerk.
Report filter Server ID (optional)Runs a report for one clerk: Short, Journal, Condensed, Tip and Totals Only. Named as your business names the clerk ID.
Tip
Settle tips on the receipt with Tip Adjustment before you run the server's Tip Report, so the report includes them.

Signature

Two settings decide signatures. Both are set by Electronic Payments or your sales office.

Signature on screen: the signature pad on the terminal for card transactions. Off (the default): the pad never shows. Always: the pad shows whenever the card asks for a signature. From amount: the pad shows at or above the amount set. On the pad, Clear starts over, OK finishes and Cancel stops the transaction.

Signature line on receipt: a Customer Signature line on the printed merchant copy for every card sale, or only at or above the amount set. A swiped card (including a chip card that fell back to swipe) always prints the signature line. Voids and refunds print no signature line.

The terminal's signature screen with Clear, Cancel and OK
The signature pad, when Signature on screen calls for it: the customer signs with a finger and presses OK.
On this screenWhat it does
Signature on screen: OffThe signature pad never shows. The default.
Signature on screen: AlwaysThe pad shows whenever the card asks for a signature.
Signature on screen: From amountThe pad shows at or above the amount set.
Clear / Cancel / OK (signature pad)Clear starts over, Cancel stops the transaction, OK finishes.
Signature line on receiptA Customer Signature line on the merchant copy of every card sale, or from an amount. Off by default. A swiped card always prints the line.

Cash sales

Press Cash on the Sale or Pay screen (shown when Take cash is on). A cash sale asks for the supervisor PIN when Sale is protected and for the clerk ID when it is on; it does not ask for an invoice number or a tip. The terminal records the sale with no card and sends it to Merchant360, where it shows on the Transactions board with the cash icon.

Steps
  1. 1Key the amount and press Cash.
  2. 2Enter the supervisor PIN and the clerk ID if the terminal asks.
  3. 3On Cash tendered, key what the customer handed over, or press Exact or a round amount. Continue turns on when the cash covers the amount due.
    The Cash tendered screen with the amount due, the amount keyed, the change due and quick amount buttons
    Cash tendered: key the cash or press Exact or a round amount.
  4. 4The result screen shows the change due. Print or send the receipt.
    The Cash Sale Successful screen with the change due large
    The change due shows large.
Good to know

With Dual Pricing the cash price applies. With a surcharge, cash pays the amount with no surcharge. An admin fee applies to cash too.

A terminal without network keeps the cash sale and sends it when the network returns, dated when the cash was taken.

When your business asks for cash tendered (on by default), the terminal shows Cash tendered with Amount due: key what the customer handed over or press Exact or a round amount. The change due shows as you key (Short $X while the cash is below the amount due), large on the result screen, and both amounts print on the receipt and are kept with the sale. While your business is on dual pricing or cash discounting, Cash stays on and cannot be turned off, so the cash price can always be paid.

Refund a cash sale from History → Cash Transactions → the sale → Refund Transaction: the refund is in cash, for all or part of what is left. A full cash refund marks the sale returned in Merchant360.

On this screenWhat it does
Cash tenderedShown when Ask for cash tendered is on: Amount due, the cash keyed, Change due, or Short $X.
ExactThe customer handed over the amount due. No change.
Round amountsThe next round amounts above the amount due, for example $30.00, $40.00 and $50.00 on $27.19.
Number panelKey any other amount. C clears it.
ContinueRecords the sale. Off while the cash is short of the amount due.
Back arrowReturns to the Sale screen with no sale recorded.
Cash Sale SuccessfulThe result: amount, change due (large), cash tendered, payment type, invoice and date.
Refund Transaction (cash sale in History)Refunds all or part of the sale in cash. Greyed out when cash is off.
If something goes wrong
The terminal has no network
It keeps the cash sale and sends it when the network returns, dated when the cash was taken.
Cash is greyed out or missing
Take cash is off for your business. While you are on dual pricing or cash discounting, Cash stays on.

Keyed (MOTO) sales

Keyed Sale takes a card that is not present, for a mail or telephone order: the clerk keys the card details on the terminal. It is on the Main Menu when Electronic Payments turns on keyed entry (MOTO) for your account; otherwise it is greyed out.

Before you start
  • Keyed entry (MOTO) is on for your account. Electronic Payments turns it on; otherwise Keyed Sale is greyed out.
Steps
  1. 1Main Menu → Keyed Sale.
  2. 2Key the amount and press Card.
    The Keyed Sale screen with an amount and the Card button with its total incl. tax
    Keyed Sale: the amount and the Card button.
  3. 3Answer the prompts.
    Confirm Keyed Sale with Sale Amount, Tax, Surcharge, Total and the surcharge disclosure
    Confirm Keyed Sale, when your settings call for it.
  4. 4Key the card number, MM, YY and CVV, then the Zip Code and Street/PO Box # when asked; each box moves on by itself.
  5. 5Press Continue when it turns green.
  6. 6Print, email or text the receipt.
Good to know

Key the amount and press Card (the button shows the total incl. tax; the Keyed Sale screen has the Card button only). The same steps as a card sale follow (supervisor PIN when Keyed sale is protected, invoice number, clerk ID, tip). When Confirm screen before a keyed sale is on (off by default), when your surcharge program has Surcharge confirmation screen on (the same setting that adds Confirm Sale to card sales, terminal app 2.42.28), or when your admin fee asks for a prompt, Confirm Keyed Sale shows next: Sale Amount, Tax (with its rate), Surcharge (with its rate) and Total, with A 3% Surcharge is added to credit cards. Debit cards are never surcharged. on a surcharge program; OK goes on, Cancel goes back. Then the terminal's secure entry screen asks for the card details, and the billing ZIP code and street number when AVS is asked (on by default).

The receipt step is titled Keyed Sale Receipt. History offers Void Transaction on a keyed sale while its batch is open and it is less than 24 hours old, and Refund Transaction after that. Keyed Pre-Auth works the same way for a pre-authorization (see Pre-authorizations), with Confirm Keyed Pre-Auth on the same settings as Confirm Keyed Sale. Keyed Refund on the Main Menu refunds an amount to a keyed card with no original sale (see Refund a transaction).

Key-enter card (app 2.47.15): the tap/insert screen of a card sale or pre-auth has no Key-enter card button. A keyed card is processed as a mail or telephone order (MOTO, cardholder not present), so a card the reader cannot read with the cardholder at the counter is not keyed: tap Cancel and ask for another card. For a phone or mail order, use Keyed Sale, Keyed Pre-Auth or Keyed Refund on the Main Menu. A sale sent from your POS shows Key enter card only when your POS turns it on for that sale.

A card sale, pre-auth, refund or gift card payment that ends on the card screen without a result (Cancel pressed, the screen timed out, or the reader errored) is not a sale and is not charged. The terminal reports it to Merchant360, where it shows under Payments as Card attempts not completed: the time, Cancelled at terminal (or Timed out / Error), the amount, the clerk ID and the terminal serial. These rows never count toward volume, batches or deposits.

The card entry screen (terminal app 2.42.27) asks for the card number, expiration month (MM) and year (YY), security code (CVV), and on one row the Zip Code and Street/PO Box # (the number only, on the number keypad). The form moves to the next box by itself: after the full card number, after MM, after YY, after the CVV (3 digits, 4 for American Express) and after the 5-digit Zip Code. The card brand logo (Visa, Mastercard, American Express, Discover) shows in the card number box. The form stays above the keypad and scrolls to the box being filled.

When the card entry screen opens, the keypad opens with it on the card number, so the clerk can key the number at once without tapping the box first (app 2.43.9).

Continue stays gray and cannot be pressed until the sale can go: a valid card number, an expiry that has not passed, the CVV when Require CVV on keyed sales is on (on by default), and a 5-digit Zip Code and a street number when Require AVS (ZIP and street number) on keyed sales is on (on by default). Then it turns green. With a require setting off, that field can be left empty.

Zip Code and Street/PO Box # show when AVS on keyed sales or Require AVS is on (both on by default). The security code, street number and ZIP code are sent with the sale; the security code is never stored on the terminal or in Merchant360, and the card number is kept as the last 4 digits only.

A keyed sale shows in Merchant360 → Transactions with a Keyed tag, under the terminal that ran it, and counts in that terminal's batch and reports like any other sale on it.

On this screenWhat it does
Keyed Sale (Main Menu)Greyed out unless keyed entry (MOTO) is on for your account.
CardGoes to keyed card entry. The Keyed Sale screen has the Card button only.
Confirm Keyed SaleThe totals before the card details, when your pricing program uses a confirmation screen.
Card detailsKeyed on the terminal's secure entry screen.
Billing street and ZIP codeAsked when AVS on keyed sales is on (the default).
Keyed Pre-Auth / Keyed RefundA keyed pre-authorization, or a refund to keyed card details with no original sale.
If something goes wrong
Continue stays gray
Something the sale needs is missing: a valid card number, an expiry that has not passed, the CVV, or the 5-digit Zip Code and street number when AVS is required.

Do this with the API:Keyed entry on the reader

Pre-authorizations

A pre-authorization holds an amount on the customer's card; you complete it later for the final amount. Pre-Auth is on the Main Menu when Electronic Payments turns on pre-auth for your account. Keyed Pre-Auth also needs keyed entry and Keyed pre-auth, which is off unless Electronic Payments turns it on. Your business can have a minimum and a maximum pre-auth amount.

Before you start
  • Pre-auth is on for your account. Electronic Payments turns it on.
Steps
  1. 1Main Menu → Pre-Auth, key the amount, press Card and take the card.
    The Pre-Auth screen with the amount keypad and the Card button
    Pre-Auth: key the amount and press Card.
  2. 2Later: Main Menu → History → Credit/Debit Transactions, and tap the pre-auth.
    An open pre-auth in History with Complete Transaction, Decrement Pre-Auth and Void Transaction
    An open pre-auth and its actions.
  3. 3Press Complete Transaction, key the final total (tax, fee and tip included, up to the pre-auth amount) and press Charge.
    Completion with Pre-Auth Amount, Enter Completion Total and the Charge button
    Enter Completion Total starts at the pre-auth amount.
  4. 4Add a tip if the terminal asks, then press OK on Confirm Pre-Auth Completion.
    Confirm Pre-Auth Completion with the amount, tax, surcharge and completion amount
    Confirm Pre-Auth Completion.
  5. 5To lower the hold without completing it, press Decrement Pre-Auth, key the amount to take off and press Continue.
    Pre-Auth Decrement with Max Decrementable Amount and Continue
    Decrement Pre-Auth: key the amount to take off the hold.
Good to know

Key the amount on Pre-Auth and press Card (the button shows the amount, with no tax or fee). The supervisor PIN is asked when Pre-auth is protected and the clerk ID when it is on; the invoice number is not asked. Then the card, and the receipt step titled Pre-Auth Receipt. The open pre-auth is in History → Credit/Debit Transactions, with Exp. in: 5d (days left) or Expired. A pre-auth stays open for completion for 7 days unless your business uses another number (up to 30).

Open the pre-auth for its details (Reprint Receipt, Date, Status, Amount, Server ID) and its actions. Complete Transaction: the screen shows Pre-Auth Amount and Enter Completion Total, filled in with the pre-auth amount. The completion total is everything charged to the card: the sale, tax, any card fee your pricing adds, and the tip. Key the final total; the Charge button shows it with the tax inside it (for example Charge $100.00 incl. $7.81 tax).

The completion total cannot be more than the pre-auth amount. A higher total shows Completion can't be more than the pre-auth amount of $100.00. and the total has to be lowered. The hold is not raised.

Tip: when the total equals the pre-auth amount, the terminal does not ask for a tip. A lower total leaves room for a tip: with tips on, the tip screen shows Tip up to $X, the amount left under the pre-auth. A larger tip shows Tip can't be more than $X.

Confirm Pre-Auth Completion shows Original Pre-Auth, the Amount, the Tax, the surcharge or fee, and the Completion Amount, with Within the pre-auth amount of $X. For example, a $100.00 pre-auth completed for $100.00 with 8.75% tax and a 3% surcharge: Amount $89.28, Tax (8.75%) $7.81, Surcharge (3%) $2.91, Completion Amount $100.00. OK charges the card; Cancel goes back.

Decrement Pre-Auth (when pre-auth decrement is on, the default) lowers the hold: the screen shows Max Decrementable Amount and Pre-Auth Decrement; key the amount to take off and press Continue. Void Transaction releases the whole pre-auth within 24 hours.

A completed pre-auth shows COMPLETED in History. Its Pre-Auth Completion offers Tip Adjustment within 24 hours, Void Transaction while its batch is open and it is less than 24 hours old, and Refund Transaction after that.

The card Totals Only report shows Open Pre-Auth Amount and Open Pre-Auth Count.

Your POS can also send a pre-auth to the terminal (app 2.43.4). The customer presents the card (no keyed entry, tip, card fee or loyalty page); the pre-auth is kept in History as a pre-auth, and your POS captures it later through Merchant360. See Send a sale from Merchant360.

On this screenWhat it does
Pre-Auth / Keyed Pre-Auth (Main Menu)Greyed out unless pre-auth is on for your account.
Exp. in: Nd / ExpiredDays left to complete an open pre-auth, in the History list.
ALL / COMPLETED / NOT COMPLETEDTabs in History when the type filter is Pre-Auth.
Complete TransactionOpens Pre-Auth Amount and Enter Completion Total.
Enter Completion TotalFilled in with the pre-auth amount. The total charged: sale, tax, any card fee and the tip. Up to the pre-auth amount.
ChargeShows the total with its tax, for example Charge $100.00 incl. $7.81 tax.
Completion can't be more than the pre-auth amount of $X.The total keyed is above the pre-auth. Lower it; the hold is not raised.
Tip up to $XThe tip screen when the total is below the pre-auth amount: the most the tip can be. No tip screen when the total equals the pre-auth amount.
Confirm Pre-Auth CompletionOriginal Pre-Auth, Amount, Tax, the surcharge or fee, Completion Amount and Within the pre-auth amount of $X. OK charges the card; Cancel goes back.
Decrement Pre-AuthLowers the hold. Shows Max Decrementable Amount. Shown when pre-auth decrement is on.
Void TransactionReleases the whole pre-auth, within 24 hours.
Refund Transaction (completion)Greyed out for 24 hours after the completion, then refunds it.
If something goes wrong
Completion can't be more than the pre-auth amount
Lower the total. The hold is not raised.
Tip can't be more than $X
The tip has to fit in what is left under the pre-auth amount.
The pre-auth shows Expired
A pre-auth stays open for 7 days unless your business uses another number. Run a new sale.

Do this with the API:Pre-auth on the reader

Sell from the item grid

For a business with a short list of items, such as a cafe, a food truck or a market stand, the terminal can show up to 96 items from your Merchant360 inventory as a grid: two across, four down, 8 to a page (up to 12 pages, Page 1 of 3). Turn the page with the arrows below the grid, or swipe left or right across it. Electronic Payments can put blank spaces between items to separate groups on a page (for example 4 items, a blank space, then 3), and can sort the items A to Z. Sizes and versions can be separate items, for example Coffee Small, Coffee Medium and Coffee Large. For add-ons and choices on an item (modifiers) and kitchen tickets, use TableTurn.

Tap an item to add one and hold it to remove one. The screen shows Items: and the count. Pay opens the Pay screen with the total. From there the sale works as any other: Card, Cash, Gift Card or Text.

Sold by weight (Payment App 2.43.5): in Inventory, set Sold by to Weight and pick the weight unit (pound, ounce, kilogram or gram); the price is the price per unit, for example $2.99 for Potato Salad per pound. The tile shows $2.99/lb. Tap it, key the weight from the scale (for example 1.37) and press Add: the sale gets Potato Salad at $4.10, and the receipt prints 1.37 lb @ $2.99/lb under the item. Tap it again to add another weighing; hold it to take off the last one. The badge shows the total weight.

Stock (Payment App 2.43.5): an item sold on the terminal comes off its quantity on hand in Inventory, by card or cash, from the item grid or an appointment ticket, whether or not the items print. An item sold by weight comes off by its weight in the item's unit, rounded to a whole unit, because stock is counted in whole units. A sale voided on the terminal puts the stock back. A pre-auth takes nothing until it is completed, and only items with Track stock on move. Each change shows in the item's stock history as Sold or Returned, with the sale's reference.

Names and prices come from your inventory, so a price change or an item marked sold out reaches the terminal within a few minutes. A sold out item shows Sold out and cannot be added. Electronic Payments sets which items show and in what order. Start screen (Settings → Mode, currency and language) sets whether the terminal opens on the Sale keypad or on Items, and a change applies as soon as it is saved; tapping the logo switches between the two.

With Print items on the receipt on (the default), the receipt lists each item (quantity, name, amount) above the subtotal, and a reprint from History shows them too. If the amount is changed after Pay, the receipt shows the totals only.

With Dual Pricing, a card sale's receipt lists each item at its card price with tax on the card price, and a cash sale's receipt lists each item at its cash price with tax on the cash price. The item lines add up to the subtotal on the printed, emailed and texted receipt.

The Items screen with eight item tiles, three selected with quantity badges, and the Pay button
Items: tap to add, hold to remove one. The badge shows the quantity; Pay shows the total.
The Pay screen with a fixed total, Card and Cash buttons and a Subtotal and Total recap
Pay: the amount is fixed, so the keypad gives way to a Subtotal, Tax and Total recap. With Dual Pricing the recap shows Card and Cash side by side.
On this screenWhat it does
Item tileTap: one more of the item. Hold: one less. A sold out item is grey, reads Sold out and cannot be added.
Item sold by weight ($2.99/lb)Tap: key the weight and press Add; the line is the weight times the price per unit. Hold: takes off the last weighing. The badge shows the total weight. Payment App 2.43.5.
Arrows / Page 1 of 3Change the page when there are more than 8 items.
Items: NHow many items are on the sale.
ClearEmpties the sale.
Pay $XOpens the Pay screen with the total.
LogoSwitches between the item grid and the Sale keypad.
Pay screen recapSubtotal, Tax and Total in place of the keypad. Card, Cash, Gift Card and Text work as on the Sale screen.
DiscountsOn the Pay screen after items, when Discounts are on in the TMS (off by default). One discount per sale: Manager, Employee or VIP (the percent set in the TMS), Open (key a percent up to the Open discount maximum), Comp (the sale closes at $0.00 with no payment and prints with its items) or Tax (the sales tax comes off). The discount comes off the items, then tax, the pricing program and the tip are figured on what is left. It prints as its own line under the items. A discount set to need the supervisor PIN asks for it when one is set. Back or No discount returns to Pay as it was. Not on the keypad sale. Payment App 2.43.27.

Fuel and fleet

For a gas station or service shop, Electronic Payments turns on Fuel and fleet for your account and ticks the fuel grades and services you sell. Each one becomes an item in your inventory with its product code already set: fuel grades are priced per gallon, services are open price unless you set a price. Set your pump prices in Inventory.

The terminal opens on three buttons: Fuel, Service and Sale. Fuel shows your grades with the price per gallon; tap one, key the gallons from the pump, and the terminal computes the total. Service shows your services; an open-price service asks for the price. Sale opens the usual keypad or item grid. On the Sale keypad or the item grid with nothing entered, the terminal returns to Fuel, Service or Sale after 10 seconds (Electronic Payments can change the time or turn it off).

On a card sale with fuel or a service, the terminal asks Is this a Visa Fleet card? with Visa Fleet and Other. Visa Fleet asks for the details your settings call for (odometer, vehicle ID, driver ID, employee number, trailer number); each can be skipped. Other goes straight to the card. The answers print on the receipt. A fuel sale's receipt also shows Fuel tax incl.: the tax already in the pump price, the gallons times your state's and the federal excise per gallon.

Debit and EBT buttons appear on the Pay screen when Electronic Payments turns them on. The customer enters the PIN on the terminal's secure PIN pad. EBT needs a terminal update and shows EBT needs a terminal update. Not available yet. until then.

  1. 1Tap Fuel, then the grade.
  2. 2Key the gallons from the pump and tap Continue.
  3. 3Choose Card or Cash on the Pay screen.
  4. 4On a card: answer Visa Fleet or Other, then any fleet prompts.
The terminal start screen with three buttons: Fuel, Service and Sale
With Fuel and fleet on, the terminal opens on Fuel, Service or Sale.
The Fuel screen with Regular, Mid/Plus, Premium/Super and Regular Diesel #2, each with its price per gallon
Fuel: your grades with the price per gallon from Inventory.
Regular with 12.153 gallons keyed, $3.490 per gallon and a total of $42.41
Key the gallons from the pump; the terminal computes the total.
The Pay screen for the fuel sale: $42.41, Card $44.11 with the card price, no sales tax
Pay: no sales tax on fuel (the pump price includes fuel taxes); a pricing program still applies.
The question Is this a Visa Fleet card? with Visa Fleet and Other buttons
On a card: Visa Fleet or Other.
The Odometer prompt, Visa Fleet 1 of 3, with 150985 keyed and Skip and Next buttons
Visa Fleet asks for each detail in turn; Skip leaves one blank.
The Service screen with Oil Change (open price), Car Wash $12.00, Motor Oil $8.99 and Tire Rotation (open price)
Service: fixed-price services go straight to Pay; open-price ones ask for the price.
Oil Change with a price of $49.99 keyed
An open-price service: key the price and Continue.
On this screenWhat it does
FuelFuel grades, priced per gallon. A grade with no price asks for the price per gallon first.
ServiceServices such as an oil change or car wash. Open price asks for the price; a fixed price goes straight to Pay.
SaleThe usual Sale keypad or item grid.
GallonsKey the gallons from the pump; Total shows as you key. Continue opens Pay.
Visa Fleet / OtherVisa Fleet asks for the fleet details; Other skips them.
Skip / Next (fleet prompts)Skip leaves a detail blank; Next keeps what was keyed.
Debit / EBTPIN on the secure PIN pad. Shown only when turned on for your account.

Gift cards on the terminal

With gift cards on for your business, Gift cards on the terminal on (the default) and the terminal connected, the Main Menu's Gift Card opens Gift Card Functions: Gift Card Redeem, Gift Card Activate, Gift Card Add Funds, Balance Inquiry, Gift Card Store Credit, Gift Card Balance Transfer and Gift Card Reissue. No gift card codes are entered on the terminal; it uses its Merchant360 connection.

Each function reads the card with Swipe Gift Card, or the Key in Gift Card Number button (the full 16-digit number).

Activate and Add Funds: key the amount, then the customer pays it by Card or Cash (a surcharge on a credit card, when your program has one). Confirm Activate or Confirm Add Funds shows the total. These ask for the supervisor PIN when Sale is protected. The card payment screen has Key-enter card and Cancel, as on a card sale; Key-enter card follows the keyed sale rules. After the payment is approved, press COMPLETE ACTIVATION (or COMPLETE ADD VALUE), then swipe the gift card or press Key in Gift Card Number.

Activate on a card that is already active adds the value to it instead, and Add Funds on a card that was never activated activates it with the value, in the same step, so the payment is never left without a load. The receipt and Gift Card history show which one ran (for example "Requested as activation: card was already active"). The one exception: a card activated or loaded for the same amount in the last 5 minutes is not loaded again; check the balance first.

Before the gift card request is sent, the terminal checks the card (terminal app 2.42.32). If Add Funds was chosen for a card that was never activated, or Activate for a card that is already active, it runs the right one and says so in a blue box on two lines, for example This card is already active. and, on the next line, $2.43 will be added. (or This card is not active yet. and It will be activated with $X.). Below the box, the Amount and Card Balance lines are in bold.

Cash taken to pay for an activation or added value counts in your cash totals like any cash sale. On the Transactions board it reads Payment for eGift activation (or Payment for eGift add value) with the gift card number, for example (card 6035 7100 0012 6410). The full number shows for owners and managers; other team members see the last 4 (card ending 6410). If the gift card step does not go through, the terminal returns the cash payment and the sale shows as refunded.

If the gift card step does not go through on a load paid in cash, the cash sale is voided on the terminal, the screen shows Return $X cash to the customer in bold, and a Cash Payment Voided slip prints when receipts print. The voided sale is left out of the cash reports.

Balance Inquiry shows the Card Balance. Store Credit loads an amount with no payment, for example for a return. Balance Transfer moves the balance from an old card to a new one (Current Balance, Transfer Amount). Reissue moves the Old Card Balance to a new card.

Gift Card on the Sale or Pay screen redeems the total on a gift card, and the tip screen shows when tips are on. Before a redeem the terminal checks the card's balance. With enough balance the full amount is redeemed. With less, the terminal redeems what the card holds and shows A partial payment of $X was processed. Collect $Y another way. Under the Invoice ID, Collect Additional $Y on Next Screen shows, and the button reads Collect $Y. The Sale screen then shows the balance due with the rest filled in (Collect $Y with Card, Cash or another Gift Card) until it is paid or the redeem is voided with Redeem Void; leaving through the menu does not clear it. If your business turns gift card partial approval off, a short card is declined with Not enough balance. This gift card holds $X, and the Card Balance line shows in bold. A card with no balance is declined with No balance on this gift card, and nothing is charged.

Redeem Void: History → Gift Card Transactions → the redeem → Void Transaction, which puts the amount back on the card (supervisor PIN when Void is protected).

Gift card reports are under Reports → Gift Card Reports. Gift Card is not offered on an appointment's sale, on a sale sent from the PC or in Training mode.

If the screen says No answer from Merchant360, check the card balance before running the card again.

Gift Card Functions: Redeem, Activate, Add Funds, Balance Inquiry, Store Credit, Balance Transfer and Reissue
Gift Card Functions.
On this screenWhat it does
Gift Card RedeemPays an amount from the card, with the tip screen when tips are on.
Gift Card ActivateActivates a new card with an amount the customer pays by Card or Cash.
Gift Card Add FundsLoads an amount onto a card, paid by Card or Cash.
Balance InquiryShows the Card Balance.
Gift Card Store CreditLoads an amount with no payment.
Gift Card Balance TransferMoves the balance from an old card to a new card.
Gift Card ReissueMoves the Old Card Balance to a new card.
Swipe Gift Card / Key in Gift Card NumberReads the card, or the 16-digit number keyed (Please enter complete 16-digit card number).
Void Transaction (Gift Card Transactions)Voids a redeem and puts the amount back on the card.
Related articles

Do this with the API:Gift cards

Text to pay from the terminal

With Text to pay on (Settings → Cash and sale prompts), a Text button sits beside Card and Cash. When Card, Cash, Gift Card and Text are all on, Text is a slim Text to pay $X button under the amount, so the three payment buttons keep their size. Key the amount (or pick items), press Text, key the customer's mobile number and press Send pay link.

The Text to pay screen shows Text a pay link for $X (the cash price and tax) and The customer pays on their phone. Any card fee is added there. Merchant360 makes an invoice for the sale and texts the customer its pay link. Any card fee (dual pricing or surcharge) is added there from their card. Nothing is charged on the terminal.

The invoice is listed in Invoices under the mobile number, with the item lines when the sale came from Items, and the reminder texts follow it like any Text2Pay invoice. A customer who replied STOP is not texted. The terminal needs Merchant360 to send: without it the screen says Merchant360 could not be reached. Nothing was sent.

The Pay screen with Card $6.79, Cash $6.53 and Text $6.53 buttons and a Subtotal, Tax and Total recap
Text sits beside Card and Cash when Text to pay is on.
Text to pay: Text a pay link for $6.53, the number (631) 822-1140 and Send pay link
Key the customer's mobile number and press Send pay link.
Text to pay after sending: Sent to (631) 822-1140. Invoice INV-0008, and a Done button
Sent: the invoice number shows, and the invoice is in Invoices.
On this screenWhat it does
TextOpens Text to pay with the cash price and tax of the sale.
Mobile numberKeyed on the number panel.
Send pay linkMakes the invoice and texts the link. Pressing it again after a network drop does not text twice.
Sent to (phone). Invoice (number).The text went out.
DoneBack to the start screen.

Loyalty at the terminal

The terminal uses your loyalty program from Marketing. It is a punch card or points. Punch card: a customer earns a punch per visit (or per amount spent) and a reward (a free item, an amount off or a percent off) when the card fills. Points: a customer earns points per visit and per dollar spent, and spends them on the rewards you set up on Loyalty (an amount off, a percent off up to a cap, or a free item from your inventory). Loyalty starts with the Loyalty Library: five standard rewards ($5 off for 100 points, 10% off up to $20 for 150, $10 off for 200, 20% off up to $50 for 350, $25 off for 500), priced for 1 point per $1. Turn each on or off with its switch on Loyalty, or edit it; a library reward is turned off rather than deleted. The customer is their phone number.

With Ask for loyalty phone on, a Loyalty page (Phone number for rewards) comes after you press Card or Cash and before every other step, so a reward lowers the amount the tip is figured on. The clerk or the customer keys the phone number and presses Continue, or presses Skip. A new number joins the program (New member. 5 visits earn $5 off.). A phone that is not 10 digits shows Enter a 10-digit phone number.

Swipe card reads a rewards card on the reader (Swipe the rewards card on the reader., Stop cancels). A card not linked yet asks for the customer's phone to link it. Rewards cards need the terminal online.

Punch card: the page shows the punches so far (3 of 5 toward $5 off.). When a reward is ready, Use reward takes it off this sale (or Give reward for a reward handed over).

Points: the page shows the balance, what this sale earns, and the rewards marked Show on the terminal (with Show offers on the terminal on: Settings → Loyalty or Merchant360 Terminal settings). The rewards the balance covers can be tapped; the others show how many more points they need. A free-item reward asks Pick the free item: its price comes off when the item is on the sale, otherwise the item is handed over free. For an item handed over, Reward slip for a free item (Settings → Loyalty or Merchant360 Terminal settings: Off, Separate slip or On the receipt; terminals with a printer) prints the item, the reward, the customer's last 4 phone digits and the sale, either as its own slip after the receipts or as a tear-off block at the foot of the customer copy, to present where the item is collected. Save my points goes on to the tip and payment without using any; Change number clears the phone.

With eGift gift cards set up, points live on an eGift card for each member. When a new member's first visit counts (an approved sale, a text receipt or a receipt QR), a card is taken from your eGift card pool, activated and tied to the phone, and the customer gets a text with the card number and points balance (no physical card is handed out). Points earned, used, voided or refunded are made on the eGift card. Customers sign in at egift.online/manage with their phone (a texted code) or email (a sign-in link) to see their cards and points. A customer who already holds one of your gift cards can link it to their phone there, with a code texted to the phone.

Loyalty in Merchant360 lists your Loyalty members by phone number: points (or punches), visits, last visit and when they joined. Search by phone, press Add member to add a customer with starting points, or open a member to see their history and add or take off points with a note.

A used reward prints on the receipt as its own line under the items. The visit's punch or points are added when the payment is approved, so a declined card earns nothing. A void or refund on the terminal gives back the points the reward used and takes back the points or punch the sale earned.

With Text receipt phone joins loyalty on, the number keyed for a text receipt earns the visit too. A sale earns one punch however the phone is given.

With Loyalty summary on the receipt on (the default, Payment App 2.42.38), a sale where a loyalty phone was keyed prints a Loyalty block on the customer copy: the member's last 4 phone digits, the points (or punches) this sale earned, the new points balance (or punches on the card), and egift.online/manage, where the customer signs in to see their rewards. Off: a shorter receipt. Offline, the block is left off and the visit still counts when the terminal is back online.

With Loyalty QR on the receipt on, the customer copy has a QR code (Scan to add this visit to your rewards). Scanning it opens the customer's receipt on their phone (items, subtotal, tax, total, payment, invoice and date), with a Rewards box below: they enter their mobile number and the visit counts toward their card (once, within 30 days).

A terminal without network keeps the phone number and adds the punch when it is back online (Saved. The visit counts when the terminal is back online.); a reward needs Merchant360 to be used. Loyalty activity from the terminal shows on Loyalty in Merchant360.

The Loyalty page with (516) 555-1212 keyed, New member. 5 visits earn $5 off, and Skip and Continue to payment
The Loyalty page before payment: a new member, and what 5 visits earn.
The receipt QR page on a phone: Your receipt, DEMO STUDIO, 3 x Cappuccino, 1 x Iced Coffee, 1 x Sausage Egg and Cheese, subtotal, tax, total, cash, invoice and date, then Rewards with a mobile number field
Scanning the receipt QR: the receipt, then Rewards.
On this screenWhat it does
SkipContinues to payment with no loyalty.
Swipe card / StopReads a rewards card on the reader; Stop cancels.
ContinueLooks up the card: punches so far and what earns the reward.
Use rewardPunch card, when a reward is ready. Takes it off this sale before payment.
A reward (points)Uses the points on that reward for this sale. A free item asks which item first.
Save my pointsPoints: goes on to the tip and payment without using points.
Change numberPoints: clears the number to key another one.
Continue to paymentGoes on to the tip and payment with the phone kept for the punch or points.
Related articles

Do this with the API:Loyalty points

Appointments on the terminal

With Scheduling in Merchant360 and Appointments on the terminal on (on by default once Scheduling is set up; Settings → Cash and sale prompts → Appointments on the terminal, or Merchant360 Terminal settings), the Main Menu has Appointments. It opens Today's appointments, soonest first, with the time, the customer, the service and staff member, a status (Booked, Arrived, In progress, Paid) and Due $X or Nothing due. Key the customer's phone in Customer phone and press Find to see that customer's open appointments from the last 7 days through today (Appointments for this phone); Today goes back to the day's list.

Tap an appointment to open its ticket: the booked service (or the work-order lines from Merchant360) with $X each, Ticket total, Deposit paid at booking, Paid earlier, and Amount due.

Check in, pay later marks the appointment Arrived in Merchant360 (the appointment window shows Arrived and the time) and leaves it open. On an appointment already checked in the button reads Pay later, or Save, pay later after a change to the ticket. When the customer is ready, find it again in the list or by phone.

Pay now $X opens Pay titled Appointment: and the customer's name, with the amount due. The customer's phone from the booking fills the loyalty page, so the visit earns points or a punch, and a reward can be used. Card or cash, then the receipt. The approved sale pays the appointment: Merchant360 shows the amount paid on the terminal, and the appointment is Completed when nothing is left. An open invoice for the appointment is marked down by the same amount. Gift card and Text to pay are not offered on an appointment's sale.

Add items opens the terminal's item list; tap items to put them on the ticket at their prices, then Done. They are saved on the appointment as its lines, so Merchant360 shows the whole visit.

Price changes on the terminal is set by you in Merchant360 Terminal settings, not on the terminal. Off (the default): prices on the ticket cannot be changed, and no price button shows. With supervisor PIN: tapping a price asks Supervisor PIN to change a price first, and Merchant360 checks the PIN again. Allowed: any clerk can change a price. The price screen shows New price with Cancel and Set price. Removing a booked line or lowering its quantity counts as a price change. Every change is logged with the old and new price and the terminal.

When the deposit covers the ticket, nothing is due and Complete closes the appointment (Completed.). When the deposit is more than the ticket (for example after a price change), the ticket says The deposit is $X more than the ticket and the button reads Complete, refund $X to card: the difference goes back to the card that paid the deposit, then the appointment closes (Completed. $X refunded to the card.). The supervisor PIN is asked first when Refund is protected. If the refund does not go through, the appointment stays open. A deposit that was not a card payment in Merchant360 is refunded in cash: the button reads Complete, refund $X cash, and the terminal says Completed. Give the customer $X in cash.

Appointments need Merchant360: with no connection the screen says Internet offline., and Merchant360 did not answer. Try again. when Merchant360 does not respond.

  1. 1Main Menu → Appointments.
  2. 2Tap the appointment, or key the customer's phone and press Find.
  3. 3Check in, pay later when the customer arrives; Add items for anything added to the visit.
  4. 4Pay now when the customer is ready, then Card or Cash.
On this screenWhat it does
Customer phone / FindThe customer's open appointments for the phone keyed.
TodayBack to today's list.
Booked / Arrived / In progress / PaidThe appointment's status.
Check in, pay laterMarks the appointment Arrived in Merchant360 and goes back to the list.
Pay later / Save, pay laterOn a checked-in appointment: back to the list, saving changes to the ticket.
Pay now $XOpens Pay with the amount due and the customer's phone for loyalty.
CompleteNothing due: closes the appointment.
Complete, refund $X to card / cashThe deposit is above the ticket: refunds the difference and closes the appointment.
Add items / DoneItems from the terminal's item list, at their prices.
$X each (under a line)Tap to change the price when price changes are allowed or need the supervisor PIN.
New price / Set price / CancelThe price change screen.
BackBack to the list without changes.

Send sales from Merchant360 or your POS

Start the sale on your computer or POS and let the customer pay on the terminal.

Send a sale from Merchant360

In Standalone mode the same terminal takes sales keyed on it and sales sent from Merchant360: the Merchant360 Terminal page (Accept Payments → Merchant360 Terminal), the Chrome extension and the Merchant360 API. There is no setting to change between the two.

Before you start
  • The terminal is on and connected to the internet.
  • For sales from the Chrome extension or the Merchant360 API, Accept sales from the PC is on for the terminal (it is on by default).
Steps
  1. 1In Merchant360, go to Accept Payments → Merchant360 Terminal.
    The Merchant360 Terminal page with Terminal, Refresh, Customer, Apply to open invoice, Amount, Reference and Send sale to terminal
    Accept Payments → Merchant360 Terminal.
  2. 2Pick the terminal in Terminal if your account has more than one. Press Refresh if it is not listed.
    A PAX terminal on the Sale keypad showing Card $0.00 and Cash $0.00
    The terminal on and ready. Keyed sales and sent sales both run here.
  3. 3Enter the Amount. Add a Reference, such as an order or ticket number, if you want one on the transaction.
  4. 4Press Send sale to terminal. The page shows Waiting for the cardholder… with the terminal's serial number.
    The dialog Waiting for the cardholder with Cancel sale on terminal
    Waiting for the cardholder. Cancel sale on terminal stops the sale.
  5. 5The terminal opens on the card screen. The customer taps, inserts or swipes, and the result shows on the terminal and on the page.
    The terminal showing the amount sent from Merchant360 and the card prompt
    The amount sent from Merchant360, waiting for the card.
Good to know

On the Merchant360 Terminal page, Terminal lists the terminals on your account by the name you gave them (Name your card readers) or by serial number. The default terminal is preselected and marked · default. Refresh reads the list again. Enter the Amount, add an optional Reference such as an order or ticket number, and press Send sale to terminal. The button stays greyed out until a terminal is picked.

The page shows Waiting for the cardholder… Tap, dip, or swipe on terminal and the serial number. The terminal goes straight to the card screen, in Standalone, Integrated and POS Listener mode alike (app 2.43.2): your logo, the amount, Tap or insert card with the tap animation, and Cancel Sale. There is no Pay screen with a Card button first. On the way it runs the steps your settings call for: the loyalty phone, the clerk ID, the tip, and the confirm screen for a surcharge or admin fee when your pricing has one. A surcharge on credit cards is charged when your pricing has one. The amount sent is the full total: the terminal does not add sales tax to it.

A sale sent to the terminal asks no supervisor PIN, even when Sale is protected, and no invoice number: the sale's reference takes the invoice number's place. A sale sent by your POS through the Merchant360 API can turn the tip screen on or off for that sale, whatever the terminal's tip setting; when the POS does not choose, the terminal's tip setting applies.

Card on file (app 2.43.4): your POS can ask the terminal to save the card during the sale. The customer presents the card as for any sale; that sale has no tip screen. When it is approved, the card is saved in Merchant360 for later charges, and the terminal does not keep it. Saving a card at the terminal needs keyed entry (MOTO) on for your account, because the saved card is charged later as a card-not-present sale.

Pre-auth from your POS (app 2.43.4): your POS can send a pre-auth in place of a sale. The terminal holds the amount the POS sent, with no tip screen, card fee, loyalty page or Key enter card: the card is read on the terminal. The pre-auth is kept in History as a pre-auth, and your POS captures it later through Merchant360. Card on file and a pre-auth from your POS need the internet: with no connection the terminal shows Internet Offline - NI and does not store them to send later.

The result shows on the terminal and on the page: Sale approved, or Sale and the decline status. The sale is listed on Money → Transactions and under Last terminal transaction on the page.

When nothing is keyed on the terminal, the sent sale opens at once. When a sale is under way on the terminal, the sent sale waits until that sale finishes. A sent sale that waits 3 minutes is cancelled, and the page reads Timed out waiting for the terminal. Check the device and try Refresh.

Cancel sale on terminal in the dialog, or Cancel on terminal beside the button, cancels the sale on the terminal. On the terminal, Cancel Sale on the card screen, Cancel at the bottom of the Pay screen (it shows only after Back from the loyalty page or the keyed card form), or the Back key, cancels it, and the page shows it was cancelled on the terminal. Nothing is charged and the sale is recorded as cancelled, not declined. Cancel Sale shows unless Cancel button on the terminal is off for the terminal, or your POS turned it off for that sale. If the card is already being read, the terminal says the sale cannot be stopped and the sale goes on.

With dual pricing on, the page shows Card price (sent to the terminal) and Cash price under the amount: the amount you type is the cash price, and the card price is what the terminal charges. Every card on the terminal pays the card price, debit included.

Sales from the Chrome extension and the Merchant360 API run the same way on the terminal. Accept sales from the PC, on by default and set per terminal by Electronic Payments, lets the terminal take them.

The Chrome extension and the Merchant360 API list only the terminals with Accept sales from the PC on (a terminal in Integrated or POS Listener mode is always listed). With several terminals, leave it on for the one at the desk and turn it off on the others: the extension then has one terminal and sends the sale straight to it, with no terminal to pick.

With a surcharge program, the page shows the credit card price and Debit cards are never surcharged before you send. The surcharge is charged only when the card qualifies: a debit or prepaid card pays the amount without it. The sale's detail in Merchant360 → Transactions shows the surcharge charged, or No surcharge on this card.

On this screenWhat it does
TerminalPicks the terminal that receives the sale, by name or serial number. The default terminal is preselected and marked · default; a person locked to one terminal sees only that one. No terminals connected means none is online.
Refresh (next to Terminal)Reads the list of terminals again. Use it after turning a terminal on.
Customer (optional)Ties the sale to a customer record. The receipt is emailed to the customer on approval, and their open invoices load in Apply to open invoice.
Apply to open invoice (optional)The customer's unpaid invoices with the balance due. Picking one fills the amount and the reference; on approval the invoice is marked paid. Reads Pick a customer first until a customer is chosen.
AmountThe sale amount, sent as the full total. With dual pricing it is the cash price.
Reference (optional)Text kept on the transaction, such as an order or ticket number. Filled with Invoice and the number when an invoice is applied.
Card price (sent to the terminal) / Cash priceShown with dual pricing on: the card price is what the terminal charges; the cash price applies to cash and check.
Sales tax on the terminalThe terminal adds sales tax to the amount when Sales tax is on in its Settings, as on a sale keyed there.
Cancel sale on terminalStops the sale on the terminal if no card was read yet. The page waits for the terminal's answer: Cancelled, or the result when a card was already read. A sale nobody starts on the terminal is cancelled after 3 minutes.
On approval noticeShown when a customer is picked: the receipt email, and the invoice marked paid when one is applied.
Send sale to terminalSends the amount to the terminal. Greyed out until a terminal is picked.
Waiting for the cardholder… / Tap, dip, or swipe on terminal (serial)The dialog shown while the sale is on the terminal.
Cancel sale on terminal (dialog) / Cancel on terminal (beside the button)Cancels the sale on the terminal after you confirm. Nothing is charged; the sale is recorded as cancelled.
Waiting on terminal…The Send button while a sale is on the terminal.
Sale approved / Sale (status)The result: approved, or the decline status.
Timed out waiting for the terminalNo result within 3 minutes; the sale is cancelled on the terminal.
From Merchant360 (terminal)The terminal screen for a sent sale: From Merchant360, Sale, the amount and Please insert, swipe or tap the card.
Accept sales from the PC (terminal setting)Lets the terminal take sales from the Chrome extension and the API. On by default. Per terminal. Electronic Payments.
Tip
The terminal has to be on and connected to the internet to receive a sale. If Terminal reads No terminals connected, check the terminal's Wi-Fi or cellular signal and press Refresh.
If something goes wrong
Timed out waiting for the terminal
The page stops waiting after about 3 minutes, but the sale may still finish. Check Transactions before you send it again: the sale stays pending there until the terminal's answer comes in. Then check the terminal is on and online and press Refresh.
The Terminal list reads No terminals connected
Check the terminal's Wi-Fi or cellular signal and press Refresh.
The terminal is missing from the Chrome extension or the API
Accept sales from the PC is off for that terminal. Electronic Payments sets it per terminal.
The customer changed their mind
Press Cancel sale on terminal. If the card is already being read, the sale cannot be stopped.

Do this with the API:Card-present sale

Pay an open invoice on the terminal

On the Merchant360 Terminal page, pick the customer in Customer (optional). Apply to open invoice (optional) lists their unpaid invoices with the balance due on each. Choose one: the Amount fills with its balance and the Reference reads Invoice and the number. Until a customer is picked the list reads Pick a customer first.

Before you start
  • The customer has an open invoice in Merchant360.
  1. 1On the Merchant360 Terminal page choose the customer in Customer (optional).
  2. 2Choose the invoice in Apply to open invoice (optional). The amount and reference fill in.
  3. 3Change the amount for a partial payment if needed.
  4. 4Press Send sale to terminal. The customer pays on the terminal.
  5. 5On approval the invoice is marked paid and the receipt is emailed.
Good to know

The page notes what happens on approval: the receipt is emailed to the customer, and the invoice is marked paid. The payment is recorded against the invoice and the sale shows on Money → Transactions and on the invoice. For a partial payment, change the amount before sending; the invoice keeps the rest of the balance open.

A customer picked with no invoice ties the sale to that customer's record, and the receipt is emailed to them on approval.

On this screenWhat it does
Customer (optional)Search by name or email, or open the list. Loads the customer's open invoices.
Apply to open invoice (optional)Each open invoice with its number, balance and due date. – None – sends a sale with no invoice.
No open invoicesThe customer has no unpaid invoices.
If something goes wrong
Apply to open invoice reads Pick a customer first
Choose the customer in Customer (optional) first.

Do this with the API:Card-present sale

Custom payment fields on the reader

To record something with every sale (a patient ID, a work order number, a technician), add it as a custom payment field and turn on its Card reader surface under Billing tools → Settings → Custom payment fields. The field then shows below the amount on the Merchant360 Terminal page. Required fields must be filled before the sale can be sent.

The values are kept on the transaction in Merchant360; nothing is sent to the terminal. They show on the transaction detail page and on the Transactions board, and export with your reports.

Billing settings, Custom payment fields: Field label, Type, Required, Show on (Payment links, E-invoices, Estimates, Checkout, Pay widget, Virtual terminal, Card reader, Mobile terminal) and Print on receipts
Tick Card reader under Show on to ask for the field on the terminal sale page.
On this screenWhat it does
Card reader surface (Custom payment fields card)Turns a custom field on for the Merchant360 Terminal page. Off by default.
Custom field inputs (terminal page)Shown below the amount. Required fields keep Send sale to terminal from sending until filled. Values are stored with the transaction and not sent to the terminal.

Do this with the API:Custom fields

Integrated mode

Integrated mode is for a dedicated terminal that only takes sales sent from Merchant360 (the Merchant360 Terminal page, the Chrome extension, the Merchant360 API) or a POS. Sales cannot be keyed on it. Terminal mode is set per terminal (see Settings reference); Standalone is the default.

The start screen is Ready for payments, with your business name, the serial number and Last payment (Approved or Not approved, the amount and time, or None yet). The tiles open History, Reports and Settings. More opens the Main Menu with History, Reports, Settings and About.

A sale sent from Merchant360 or your POS goes straight to the card screen, as in the other modes (app 2.43.2): the amount, Tap or insert card and Cancel Sale. The customer presents the card; the result shows on the terminal and in Merchant360.

With Accept sales from the PC off for the terminal, a sale reaches it through the Handpoint Cloud: the screen shows From Merchant360 and the type (Sale, Refund, Pre-Auth) above the amount, and the result shows Approved, Card ending, Approval code, or Not approved. Done returns to Ready for payments; it also returns on its own.

Everything else about a sent sale (the steps it runs, a sale that waits while another is under way, cancelling) is the same as in Standalone mode. See Send a sale from Merchant360.

The Ready for payments card and the last payment sit in the middle of the screen, between the header and the tiles (app 2.43.0).

Ready for payments with the business name, serial number, Last payment and the History, Reports, Settings and More tiles
Integrated mode: Ready for payments.
On this screenWhat it does
Terminal mode (Settings reference)Standalone (the default), Integrated or POS Listener. Per terminal.
Ready for paymentsThe start screen: business name, Serial number and Last payment.
History / Reports / SettingsOpen those screens.
MoreThe Main Menu: History, Reports, Settings and About.
From Merchant360 / Waiting for the cardA sent sale is on the terminal.
Approved / Not approvedThe result, with Card ending and Approval code.
DoneBack to Ready for payments; on its own after 20 seconds.
Sale sent from the PCA sale from the Chrome extension or the API, on the Pay screen.

Do this with the API:Terminal modes and POS Listener

POS Listener mode

POS Listener mode is for a terminal that your POS runs, or for a business that wants a bare screen (for example a doctor's office). The waiting screen shows your logo large at the top, a message in the middle (Ready for Payment unless a different one is set), a contactless mark with rings that pulse out from it under the message (app 2.43.4), and your software partner's logo as a band across the bottom, under a thin line, when there is one. It has no keypad and no History, Reports, Settings or More tiles. Sales come only from your POS or from Merchant360 (the Merchant360 Terminal page, the Chrome extension, the Merchant360 API).

The logo at the top is the logo on your Business Profile; without one, your sales office's terminal logo, or the Merchant360 logo. The logo at the bottom is your software partner's (the POS company that connects you to Merchant360); without one, your sales office's terminal logo when it is not already at the top, or nothing. Your software partner can instead put its logo at the top in place of yours, or show none. The message is Waiting screen message (up to 40 characters), which you can change in Merchant360 Terminal settings. Ready for Payment shows in the terminal's language; a message you type shows as typed.

Staff menu: hold the logo at the top for 3 seconds. The terminal asks for the supervisor PIN when one is set, then opens the Main Menu. The back arrow returns to the waiting screen, and so does leaving the menu untouched for 2 minutes.

Wi-Fi: tap the logo 3 times quickly. The terminal asks for the supervisor PIN (the tech PIN when no supervisor PIN is set), then opens the Wi-Fi list; pick the network, then press back to return to the waiting screen (app 2.46.1).

A sale from your POS opens at once, with no Pay screen: the amount, Tap or insert card, and the tap animation. Since app 2.43.2 a sent sale opens this way in Standalone and Integrated mode too. The customer taps, inserts or swipes; the result shows as in the other modes, and the terminal goes back to the waiting screen.

A sale from your POS asks no supervisor PIN, and your POS can turn the tip screen on or off for each sale; when it does not choose, the terminal's tip setting applies. Your POS can also ask the terminal to save the card during a sale, or send a pre-auth that the terminal holds and your POS captures later (app 2.43.4). See Send a sale from Merchant360.

Cancel Sale shows while the terminal waits for the card, unless Cancel button on the terminal is off or your POS turned it off for that sale. It stops the sale, shows Sale cancelled and goes back to the waiting screen; nothing is charged and Merchant360 records the sale as cancelled on the terminal. If the card is already being read, the sale cannot be stopped and goes on.

Key enter card shows only when your POS turns it on for that sale. There is no setting on the terminal or in Merchant360 that turns it on, so no one at the terminal can start a keyed sale. It also needs keyed (MOTO) sales allowed on your account by Electronic Payments; without it, your POS gets an error and the sale never reaches the terminal. Key enter card opens the keyed card form for the same amount, with no supervisor PIN. Your POS can also send a sale that opens the keyed form directly.

Terminal mode is set per terminal (see Settings reference); Standalone is the default. Cancel Sale and Key enter card are buttons of the Merchant360 Payment App; a terminal running the stock Handpoint app does not have them.

On this screenWhat it does
Terminal mode (Settings reference)Standalone (the default), Integrated or POS Listener. Per terminal. Terminal and Merchant360.
Logo (top)Your Business Profile logo; without one, your sales office's terminal logo, or the Merchant360 logo. Hold it 3 seconds for the Main Menu (supervisor PIN when one is set).
Ready for Payment (message)Waiting screen message, up to 40 characters. Changed in Merchant360 Terminal settings.
Logo (bottom)Your software partner's logo. Your software partner can show it at the top instead, or not at all.
Tap or insert cardA sale from your POS is waiting for the card, with the amount.
Cancel SaleStops the sale and goes back to the waiting screen (Sale cancelled). Shown unless Cancel button on the terminal is off or your POS turned it off for that sale.
Key enter cardOpens the keyed card form for the same amount. Shown only when your POS turns it on for that sale; needs keyed (MOTO) sales allowed.
Back arrow (Main Menu)Back to the waiting screen; also after 2 minutes untouched.

Do this with the API:Terminal modes and POS Listener

After the sale

Receipts, voids, refunds and tip adjustments.

Receipts

Each copy prints Auto (after every sale), Prompt (the terminal asks Print Merchant Receipt? Would you like to print this receipt? with No and Yes, then the same for the customer copy) or No Print, as set for your business. The defaults are customer copy Prompt and merchant copy No Print. Change them on the terminal under Settings → Receipts and printing or in Merchant360 Terminal settings.

The receipt step is titled after the transaction: Sale Receipt, Keyed Sale Receipt, Pre-Auth Receipt, Tip Adjustment Receipt, Sale Void Receipt and so on. Under the title the result and the amount show, for example APPROVED $12.50 in green (app 2.43.15), so you can see the sale went through before the customer copy question. A partial approval or a decline shows in red.

After an approved card sale the terminal goes straight to the receipt step, without a details screen and Next button (Go straight to the receipt prompt). A declined sale still shows its details so you can see why.

When the customer copy is a Yes / No question, No takes you straight back to the sale screen (No customer copy returns to sale). With this off, No shows the receipt options (email, text) instead. Both are in Settings → Receipts and printing (No customer copy returns to sale shows under Customer copy when it is on Prompt) and in Merchant360 Terminal settings.

Print declined transactions: when on, a sale that fails or declines prints a receipt too.

Email Receipt and Text Receipt show as your business is set up (Digital receipt: Email, SMS, Both or Neither; Both unless Electronic Payments sets another). Email Receipt asks for the customer's email address; Text Receipt asks for the mobile number on the number panel. Email and text receipts end with your footer message, as the printed receipt does.

What prints: your logo (Logo on receipts), the header lines (business name, address and phone in the order Electronic Payments sets), the sale, the items when Print items on the receipt is on, tax, fee, tip, total, the card and approval, Invoice (INV), the clerk ID, the loyalty line or reward, the cash tendered and change, a signature line (see Signature), and the footer message. On the receipt tip mode, the merchant copy prints the suggested tips and blank Tip and Total lines.

On a terminal without a printer, the receipt screen shows Email Receipt and Text Receipt only, and History shows Send Receipt in place of Reprint Receipt.

With no internet the terminal still prints: the receipt goes straight to the terminal's printer with the same layout.

If a print does not finish (out of paper, or no answer from the printer within 25 seconds), Print Failed shows for a moment and the receipt screen stays open to print again.

Reprint later: History → the transaction → Reprint Receipt → Select Receipt Copy: Merchant Copy or Customer Copy.

The Sale Receipt screen with Reprint Merchant Receipt, Print Customer Receipt, Email/SMS Receipt and Back to Home
The receipt screen after a sale.
Print Merchant Receipt? Would you like to print this receipt? with No and Yes
Merchant copy on Prompt: the terminal asks first.
Print Customer Receipt? Would you like to print this receipt? with No and Yes
Customer copy on Prompt: No returns to the Sale screen.
The Text Receipt panel with a mobile number entered on the number panel
Text Receipt: the number is keyed on the number panel.
On this screenWhat it does
Reprint Merchant ReceiptPrints the merchant copy again.
Print Customer ReceiptPrints the customer copy.
Print Merchant Receipt? / Print Customer Receipt? (No / Yes)The questions when a copy is on Prompt, merchant copy first; each reads Would you like to print this receipt?. No returns to the sale screen when No customer copy returns to sale is on.
Email ReceiptSends the receipt by email. Type the customer's address and press Send.
Text ReceiptSends the receipt by text message. Key the customer's mobile number on the number panel and press Send; Change edits it. The text names your business and the total and ends with your footer message; the customer can reply STOP.
Receipt sent successfullyThe email or text went out.
Print Successful / Print FailedThe print result. Print Failed leaves the receipt screen open to try again.
Back to HomeReturns to the Sale screen or the item grid.
Reprint Receipt → Select Receipt Copy (History)Merchant Copy or Customer Copy of any transaction from the last 7 days.
Send Receipt (History, no printer)Email or text the receipt of a transaction.
If something goes wrong
Print Failed
The printer is out of paper or did not answer within 25 seconds. Load paper; the receipt screen stays open to print again.
No internet
The terminal still prints. Email and text receipts need the connection.

Voids, refunds and tip adjustments

All of these start from History: open the transaction. The details show the type and total, Reprint Receipt, Date, Transaction Status, Amount, Tip Amount, Total Tax (tap the i for the tax parts), the Surcharge or fee, and the Server ID. The buttons below depend on the transaction's type, its age and your settings.

Card sale or keyed sale: one button. Void Transaction (when Void is on) while the batch is open and the sale is less than 24 hours old: the sale is reversed before it settles. Refund Transaction (when Refunds is on) after the batch closes or after 24 hours. Tip Adjustment (when tips are on) within 24 hours.

Cash sale: Refund Transaction while something is left to refund (greyed out when cash is off).

Refund less than 24 hours old: Void Transaction.

Open pre-auth: Complete Transaction, Decrement Pre-Auth and Void Transaction. Pre-auth completion: Tip Adjustment within 24 hours, Void Transaction while its batch is open and it is less than 24 hours old, Refund Transaction after that.

Gift card redeem: Redeem Void, from Gift Card Transactions.

Once the batch has closed, tips cannot be adjusted and sales cannot be voided, only refunded.

Each action asks for the supervisor PIN when your business protects it, and for the clerk ID when it is on. The details screen shows what has already happened: Voided Amount, Refunded Amount, Incremented By, Decremented By, Completed amount, and Current Status. A sale partly voided or partly refunded also shows Final Amount, what is left of it (app 2.43.9).

A card sale's details in History: the sale total, Reprint Receipt, Date, Transaction Status, Amount, Tip Amount, Total Tax, Surcharge, Server ID, and the Tip Adjustment and Void Transaction buttons
A card sale less than 24 hours old: Tip Adjustment and Void Transaction (shown in Training mode).
On this screenWhat it does
Void TransactionCard sale, keyed sale, refund or pre-auth less than 24 hours old, before the batch closes, when Void is on.
Tip AdjustmentCard sale, keyed sale or completion less than 24 hours old, before the batch closes, when tips are on.
Refund TransactionCard sale or completion 24 hours or older, or a cash sale, when Refunds is on.
Complete Transaction / Decrement Pre-AuthOn an open pre-auth.
Reprint Receipt / Email/SMS ReceiptOn every transaction.
Current Status / Voided Amount / Refunded AmountWhat has already happened to the transaction.

Void a transaction

A void cancels a card transaction before its batch closes, so the charge does not settle. The card is not needed.

Before you start
  • The sale is less than 24 hours old and its batch has not closed. After that, refund it.
Steps
  1. 1Main Menu → History → Credit/Debit Transactions, and tap the sale.
  2. 2Press Void Transaction.
  3. 3Enter the supervisor PIN if asked.
  4. 4Leave the amount for a full void or key a smaller one, and press Continue.
    The void screen with Max Voidable Amount, Void Amount, the number panel and Continue
    The amount left is filled in; with Partial void on, key less.
  5. 5Print or send the void receipt.
    The receipt question after a void
    The void receipt step.
Good to know

History → Credit/Debit Transactions → the sale → Void Transaction. The screen shows Max Voidable Amount (what is left of the sale) and Void Amount, filled in with that amount. With Partial void on (the default), key a smaller amount to void part of the sale; with it off, the void is for everything left. Press Continue: there is no separate confirmation. The clerk ID is asked next when it is on, Processing void transaction... shows until the processor answers, and then the receipt step (Sale Void Receipt).

The supervisor PIN is asked when Void is protected (it is by default).

The same screen voids a refund (Refund Void), a keyed sale (Keyed Sale Void, needs keyed entry on), a pre-auth (Pre-Auth Void) and a keyed pre-auth. A loyalty reward used on the sale gives its points back, and the points or punch the sale earned come off.

Void Transaction shows while the transaction's batch is open and it is less than 24 hours old. After that, Refund Transaction shows in its place. If the void is declined because the batch has already closed, the result screen offers Refund $X to the same card: one tap opens the refund for the same amount, without the card when Refund without the card is on, else with the card. No other decline offers a refund.

In History the original sale then carries a grey chip: VOIDED when the whole sale was voided, PARTIALLY VOIDED when part of it was.

On this screenWhat it does
Max Voidable AmountWhat is left of the transaction to void.
Void AmountThe amount to void. Keyed when Partial void is on; otherwise everything left.
Amount exceeds maximum voidable limitThe amount keyed is above what is left.
ContinueSends the void. Processing void transaction... shows until the processor answers.
Sale Void / Refund Void / Pre-Auth Void / Keyed Sale VoidHow the void shows in History and on its receipt.
VOIDED / PARTIALLY VOIDEDGrey chip on the original sale in History after a full or partial void.
If something goes wrong
There is no Void Transaction button
The sale is more than 24 hours old or its batch has closed. Use Refund Transaction.
Incorrect PIN. Please try again.
Key the supervisor PIN again. Electronic Payments sets and changes it.

Do this with the API:Cancel, void and refund

Refund a transaction

Refunds are on when Electronic Payments turns on Refunds for your account (on by default). Refund to the original card only (off by default) makes a refund to any other card decline.

Before you start
  • Refunds are on for your account (on by default). A card sale cannot be refunded on the terminal in its first 24 hours; void it instead.
Steps
  1. 1Main Menu → History → Credit/Debit Transactions, and tap the sale.
  2. 2Press Refund Transaction.
  3. 3Enter the supervisor PIN if asked.
  4. 4Key the refund amount.
    The refund screen with Max Refundable Amount, Refund Amount, and the Automatic and Swipe/Insert/Tap buttons
    Automatic refunds without the card; Swipe/Insert/Tap reads it.
  5. 5Press Automatic, or Swipe/Insert/Tap and take the card.
Good to know

Refund a sale (linked refund): History → the sale (after its batch closes, or 24 hours or older) → Refund Transaction. The screen shows Max Refundable Amount and Refund Amount; key all or part of it. Then: Automatic refunds to the original card with no card present (when Refund without the card is on; greyed out otherwise), or Swipe/Insert/Tap reads the customer's card. A keyed sale is refunded as a keyed refund; a cash sale is refunded in cash.

Refund with no original sale (unlinked refund): Main Menu → Refund opens Refund $0.00 with the number panel and a single Card button; key the amount, press Card and take the card. Keyed Refund works the same with the card details keyed. your business can have a maximum, shown as Maximum unlinked refund amount is $X.

The supervisor PIN is asked when Refund is protected (it is by default; this covers both kinds of refund), and the clerk ID when it is on. A refund less than 24 hours old can be voided.

History shows each refund with Refund Type (Linked or Unlinked) and Refunded against the original sale. The ALL, LINKED and UNLINKED tabs filter refunds.

The original sale carries a blue chip in History: REFUNDED when the whole sale was refunded, PARTIALLY REFUNDED when part of it was.

Main Menu Refund: the Refund amount keypad and the Card button
Main Menu → Refund: key the amount and press Card (shown in Training mode).
On this screenWhat it does
Max Refundable AmountWhat is left of the sale to refund.
Refund AmountThe amount to refund; key all or part.
AutomaticRefunds to the original card with no card present. Greyed out unless Refund without the card is on.
Swipe/Insert/TapReads the customer's card for the refund.
Refund (Main Menu)A refund with the card and no original sale.
Keyed Refund (Main Menu)A refund to keyed card details with no original sale.
Maximum unlinked refund amount is $XYour business's limit on a refund with no original sale.
Refund Type: Linked / UnlinkedIn History: refunded against a sale, or not.
REFUNDED / PARTIALLY REFUNDEDBlue chip on the original sale in History after a full or partial refund.
If something goes wrong
Automatic is greyed out
Refund without the card is off for your business. Press Swipe/Insert/Tap and take the customer's card.
The refund declines on a different card
Refund to the original card only is on. Refund to the card used for the sale.
Maximum unlinked refund amount is $X
A refund with no original sale is over your business's limit.

Do this with the API:Cancel, void and refund

Tip adjustment

Tip Adjustment adds or raises the tip on a card sale already approved, for example the tip a customer wrote on the receipt.

Steps
  1. 1Main Menu → History → Credit/Debit Transactions.
  2. 2Tap the sale. Use the Tipped or Untipped filter to find sales still waiting for a tip.
  3. 3Press Tip Adjustment.
  4. 4Tap a suggestion or Custom Tip and key the tip from the receipt.
  5. 5Check Confirm Tip Adjustment and press OK.
    Confirm Tip Adjustment: Original Amount, Tip, Surcharge, Tax and Total, with Cancel and OK
    Confirm Tip Adjustment shows the new total.
Good to know

History → Credit/Debit Transactions → the sale shows Tip Adjustment when tips are on for your business, the sale is approved, less than 24 hours old and its batch has not closed. It shows on a Sale, a Keyed Sale and a pre-auth completion; not on a cash sale or a PIN debit sale.

The tip screen opens with the suggestions, figured on the sale amount (on a $40.00 sale: 15% $6.00, 18% $7.20, 20% $8.00, 25% $10.00), Custom Tip and No Tip. The new tip must be higher than the tip already on the sale: Tip must exceed original tip $X to make an adjustment. Confirm Tip Adjustment shows the Original Amount, the Tip, the Surcharge (on a surcharge program), the Tax and the new Total, for example $40.00 + $7.20 tip + $1.31 surcharge + $3.50 tax = $52.01: the surcharge is not applied to the tip. OK sends it; Cancel goes back.

The receipt step follows, titled Tip Adjustment Receipt.

Processing Tip Adjustment... shows while the processor answers. When there is no answer after 60 seconds, Close appears. If the adjustment did not go through, try again later from History.

After the batch closes a tip can no longer be adjusted. With Close batch on the terminal, adjust every tip first, then close the batch.

On this screenWhat it does
Tip AdjustmentOn a card sale, keyed sale or pre-auth completion in History, less than 24 hours old, before the batch closes, when tips are on.
Tip must exceed original tip $X to make an adjustmentThe new tip is not higher than the tip already on the sale.
Tip screen (tip adjustment)The sale as charged, as in Tips to Adjust, with Sale, Tax and Surcharge or fee under it, and the card and time. Percent tips are on the sale amount: 15% of $1.50.
Confirm Tip AdjustmentOriginal Amount, Tip, Tax and Total. OK sends it; Cancel goes back.
Processing Tip Adjustment...Waiting for the processor. Close appears after 60 seconds without an answer.
Tip Adjustment failedThe processor did not accept it. Try again later from History.
Approved: New total $X, Tip $YThe result shows the sale's new total, with the tip under it.
Tip adjustment receiptSubtotal, tax, Surcharge or fee and Total as on the sale receipt, then Tip and New total. A second adjustment replaces the tip: the new total is the sale total plus the new tip. Email and text receipts show the same lines.
Important
After the batch closes, a tip can no longer be adjusted. Adjust every tip first, then close the batch.
If something goes wrong
There is no Tip Adjustment button
Tips are off, the sale is more than 24 hours old, the batch has closed, or the sale is cash or PIN debit.
Tip must exceed original tip $X to make an adjustment
The new tip has to be higher than the tip already on the sale.
Close appears after Processing Tip Adjustment...
The processor did not answer within 60 seconds. Try again later from History.

Receipts, void and refund from Merchant360

Under the sale form, Last terminal transaction shows the most recent terminal sale of the day: the time, the amount (with the tip), the card, the status and the approval code. Refresh reads it again. A sale with refunds carries a Refunded $X tag. With no sale today it reads No terminal transactions today.

  1. 1Find the sale under Last terminal transaction, or open it on Money → Transactions.
  2. 2Press Void and confirm (the whole sale), or press Refund and confirm or type the amount.
  3. 3The page shows Voided. The charge will not settle., or Refunded to the card.
Good to know

Email receipt asks for the email address and Text receipt for the mobile number; each is filled in when the sale was tied to a customer. Print receipt opens a printable receipt in a new window. When a customer was picked before the sale was sent, the receipt is emailed to them on approval.

Void shows for 24 hours after the sale while nothing has been refunded on it. It reverses the whole sale, with no amount to enter, and the charge does not settle. If the batch has already closed, a refund of the full amount runs in its place. Refund asks for the amount, with what is left filled in: leave it for everything left or type a smaller amount. A sale reversed in full reads Already reversed. A large reversal can ask for a security code sent by text.

The same Void and Refund are on Money → Transactions, on the sale's row and on its detail page, for any terminal sale. The card is not needed for a void or refund started in Merchant360. On the terminal itself, voids and refunds start from History (see Voids, refunds and tip adjustments).

The Email receipt prompt: Email address for the receipt:, with Cancel and OK
Email receipt asks for the address; it is filled in when the sale was tied to a customer. Text receipt asks for a mobile number the same way.
The printable receipt with the business name, APPROVED, Total, Card, Authorization, Date and Transaction
Print receipt opens this receipt in a new window for your office printer.
Money → Transactions listing card sales with statuses such as Captured, Declined, Cancelled and Voided, and a Partial refund tag
Money → Transactions lists every terminal sale with its status. A partly refunded sale carries a Partial refund tag with the amount.
On this screenWhat it does
Last terminal transactionToday's most recent terminal sale: time, amount (incl. tip), card, status and approval code. No terminal transactions today when there is none.
Refresh (Last terminal transaction)Reads the last sale again.
Email receiptAsks for the email address (filled in from the customer) and sends the receipt.
Text receiptAsks for the mobile number (filled in from the customer) and texts the receipt.
Print receiptOpens a printable receipt in a new window.
VoidReverses the whole sale. Shown for 24 hours after the sale while nothing has been refunded. Voided. The charge will not settle.
RefundAsks for the amount, with what is left filled in. Refunded to the card.
Refunded $XHow much of the sale has been refunded.
Already reversedNothing is left to void or refund.
Void / Refund (Money → Transactions)The same actions on the sale's row and detail page, for any terminal sale.
Amounts (a terminal sale's detail page)Subtotal, Tax, Surcharge when charged (or Not applied on a debit card), Authorized amount, each Tip adjustment with its time and tip, and Current total: the sale before tip plus the latest tip. A second adjustment replaces the tip, it is not added.
If something goes wrong
Already reversed
The sale was voided or refunded in full.
A security code is asked
A large reversal can ask for a code sent by text. Enter it to continue.

Do this with the API:Cancel, void and refund

Supervisor PIN

The supervisor PIN is a 4-digit PIN set for your business, or for one terminal, by Electronic Payments or your sales office. It is not shown or changed on the terminal or in Merchant360; ask Electronic Payments to set or change it.

It opens Settings on the terminal. When no supervisor PIN is set, Settings opens without one.

Electronic Payments also chooses which actions ask for it (Supervisor PIN required for): Sale, MOTO Sale, Pre-auth, MOTO Pre-auth, Completion, Refund and Void. Refund and Void are on by default. A protected action shows Enter Supervisor PIN, This action requires supervisor authorization; a wrong PIN shows Incorrect PIN. Please try again.

If an action asks for a supervisor PIN and none is set for your business, contact Electronic Payments support to set one.

A sale sent to the terminal from Merchant360 or your POS does not ask for the supervisor PIN, even when Sale is protected (app 2.43.2). Sales started on the terminal still ask for it.

The Enter Supervisor PIN screen with four digit boxes and the number panel
Actions your business protects ask for the supervisor PIN first.
On this screenWhat it does
SettingsAlways asks for the PIN when one is set.
SaleCard and cash sales, gift card Activate and Add Funds.
MOTO SaleKeyed sales.
Pre-authPre-auths and Decrement Pre-Auth.
MOTO Pre-authKeyed pre-auths.
CompletionCompleting a pre-auth.
RefundRefunds with or without an original sale, cash refunds, and an appointment deposit refund. On by default.
VoidVoids, gift card Redeem Void, and Close batch. On by default.
Price changes on the terminal: With supervisor PINAppointment ticket price changes, set in Merchant360 Terminal settings.
Incorrect PIN. Please try again.The PIN keyed is not the supervisor PIN.

End of day

History, reports and closing the batch.

History and reports

History has Credit/Debit Transactions, Gift Card Transactions and Cash Transactions. Each list shows the newest first; a card row shows the type, a Tip: $X chip, the masked card number, the invoice number, the amount, the date and time and the status (AUTHORIZED); Load More shows older ones. The filter list starts on Any. The terminal keeps the last 7 days.

A sale that has been voided or refunded carries a status chip on the original sale, in the list and on its details: VOIDED or PARTIALLY VOIDED in grey, REFUNDED or PARTIALLY REFUNDED in blue.

The card list filters by Date (Today, Yesterday, Last 7 Days, Last 30 Days, This Month, Custom Date...), Transaction Type, Card Number, Approval Code, Invoice ID, Amount, Tipped Transactions, Untipped Transactions and Clerk ID. With Refund picked as the type, ALL, LINKED and UNLINKED tabs show; with Pre-Auth, ALL, COMPLETED and NOT COMPLETED. The gift card list filters by the last 4 digits of the gift card. Electronic Payments can turn the filters off.

Open a transaction to see its details (Date, Transaction Status, Current Status, Amount, Tip, Total Tax, Transaction ID, Invoice ID, Entry Mode, Status Message, the clerk), to reprint either copy (Reprint Receipt; Send Receipt on a terminal without a printer), to send it by email or text, or to void, refund, complete or adjust it.

A sale that was partly voided or partly refunded shows Final Amount under Voided Amount or Refunded Amount: what is left of the sale after the void or refund (app 2.43.9).

Reports show and print a day's activity by tender: Credit / Debit Card Reports, Cash Reports and Gift Card Reports. See Report types. With Close batch on the terminal on, the Reports screen also has the Close batch box (see Batch close).

The History menu with Credit/Debit, Gift Card and Cash transactions
History: card, gift card and cash transactions.
The Credit/Debit Transactions list with filter chips and transactions
Credit/Debit Transactions: the filter on Any, then each transaction with its tip, card, invoice, amount and status (shown in Training mode).
The Reports menu with card, cash and gift card reports
Reports by tender.
The list of card report types
Short, Journal, Condensed, Tip, Totals Only and Tax Only.
On this screenWhat it does
Credit/Debit TransactionsCard sales, keyed sales, pre-auths, completions, refunds and voids.
Gift Card TransactionsRedeem, activate, add funds, balance inquiry, store credit, transfer and reissue.
Cash TransactionsCash sales and cash refunds.
DateToday, Yesterday, Last 7 Days, Last 30 Days, This Month or Custom Date... (the terminal keeps 7 days).
Transaction TypeOne type, for example Sale, Refund, Pre-Auth or Tip Adjustment.
Card Number / Approval Code / Invoice ID / AmountSearch by that value.
Tipped Transactions / Untipped TransactionsCard sales with or without a tip; Untipped finds sales still waiting for a tip adjustment.
Clerk IDOne clerk's transactions.
Load MoreShows older transactions.
VOIDED / PARTIALLY VOIDED (grey)Chip on a sale voided in full or in part.
REFUNDED / PARTIALLY REFUNDED (blue)Chip on a sale refunded in full or in part.
COMPLETED (green)Chip on a pre-auth that has been completed.
AVSOn a keyed sale or pre-auth: the issuer's street and ZIP check, for example Street and ZIP match. Shows when the terminal is online.

Report types

Main Menu → Reports, pick the tender, then the report. The menus show the report types enabled for your business by Electronic Payments. By default card and gift card reports offer Short Report, Journal Report, Condensed Report, Tip Report, Totals Only and Tax Only, and cash reports offer Short Report, Journal Report, Condensed Report, Totals Only and Tax Only.

Each report opens on today. Filter picks the date (the terminal keeps the last 7 days; older days are in Merchant360 → Transactions) and, on every report except Tax Only, the clerk filter for one clerk's or server's transactions, named as your business names the clerk ID (Clerk ID (optional), Server ID (optional) or Operator ID (optional)). Tax Only filters by Tax Type: All, State, County, City or Special District. Continue runs it. The report header shows Date, Clerk ID (All, or the ID filtered), Device S/N and Tender Type (CREDIT/DEBIT, CASH or E-GIFT). Print Report prints what is on screen. Reports cover the transactions taken on this terminal.

Short Report: one line per transaction (TIME, TYPE, CARD #, TIP, AMOUNT) and a Summary: Total Records, Total Sales (Base, after voids), Total Tax Collected, Total Tip Amount, Total Fee, Total Refund Amount and Overall Total Amount.

Journal Report: each transaction in full: Transaction #, Account #, Auth Code, Entry / Verify, Clerk, Tip, Tax and Fee, then the Summary.

Condensed Report: a compact line per transaction with Transaction #, Account #, Approval and Clerk, then the Summary.

Tip Report: Tip Breakdown (Total Tips at Sale, Total Tip Adjustments, Average Tip) and Summary (Tipped Transaction Count, Total Tips, Total Voided Tips, Overall Tips). Filtered by a server's ID it is that server's tips for the day. The counts and the average leave out voided sales.

Totals Only: Transaction Totals (Total Refund Amount (after voids), Total Refund Count, Total Void Amount, Total Void Count, Open Pre-Auth Amount and Count, Credit Card and Debit Card transactions and amounts, Other Card transactions, Record Count, Overall Amount), then Tip (Total Tip (after voids), Total Sales Excl. Tip (after voids)), Tax and Fee sections. The counts leave out voided sales. The gift card version shows Gift Card Activity: activations, add funds, store credit, balance transfers and reissues.

Tax Only: Taxable Sales, Taxed Sale Count, Total Tax Collected, and the Breakdown by Tax Types (state, county, city and special district tax collected and voided).

Money going back out prints in parentheses (app 2.43.9): a void, partial void, refund or other reversal of $10.00 shows as $(10.00), and so do their totals (for example Total Void Amount, Total Refund Amount, voided tips and tax voided). Any negative figure on a report shows in parentheses in place of a minus sign.

Card deposits: on a surcharge or dual pricing account with a daily discount plan, the card Short Report and Totals Only end with Card sales processed, Collected tips (included), Collected sales tax (included), Daily discount, Refunds and Deposit amount, using the rates in effect on the day of each sale. Electronic Payments can turn this off with Show the daily discount on reports (on by default with a daily discount plan), for example on Interchange plus pricing; the reports then end at the card totals.

Daily report: with Print the daily report on (Settings → Receipts and printing), the card Totals Only report for the day prints once a day at the print time (11:00 PM unless you choose another hour). A terminal that was off or asleep then prints it when it is next opened.

The report filter: Date with the note This terminal keeps the last 7 days. Older days are in Merchant360 > Transactions., Clerk ID (optional) and Continue
Filter: the date (last 7 days) and, optionally, one clerk ID.
Credit / Debit Card Reports: Short Report, Journal Report, Condensed Report, Tip Report, Totals Only and Tax Only
The card report list.
A card Short Report for today with its transactions and summary
A Short Report on screen. Print Report prints it.
Card Totals Only: Transaction Totals with refund, void, open pre-auth, credit card and debit card lines
Totals Only: Transaction Totals.
Card Totals Only further down: the Tip section with Total Tip (after voids) and Total Sales Excl. Tip, then tax and fee
Totals Only, further down: Tip, Tax and Fee.
On this screenWhat it does
Credit / Debit Card ReportsThe types enabled for your business; by default Short Report, Journal Report, Condensed Report, Tip Report, Totals Only, Tax Only.
Cash ReportsBy default Short Report, Journal Report, Condensed Report, Totals Only, Tax Only.
Gift Card ReportsBy default Short Report, Journal Report, Condensed Report, Tip Report, Totals Only, Tax Only.
FilterThe date (last 7 days) and the clerk filter (Clerk ID, Server ID or Operator ID (optional)), or Tax Type on Tax Only. Continue runs the report.
Report headerDate, Clerk ID, Device S/N and Tender Type (CREDIT/DEBIT, CASH or E-GIFT).
Print ReportPrints the report on screen. Printing report... while it prints.
No transactions found for this filterNothing matches the date and clerk.
Card depositsCard sales processed, Collected tips, Collected sales tax, Daily discount, Refunds, Deposit amount. On the card Short and Totals Only, with a daily discount plan and Show the daily discount on reports on.
Show the daily discount on reportsOn by default with a daily discount plan. Off: the Card deposits lines are left out. ISO360 only.

Batch close

The batch is the group of card sales that settles together and goes to your deposit. Once a batch closes, its tips cannot be adjusted and its sales cannot be voided, only refunded.

Auto-close batch: Merchant360 closes your batch every day at the batch close time in your local time, 11:00 PM unless Electronic Payments sets another time, whether your terminals are on or off. This is set by Electronic Payments or your sales office for all your Merchant360 terminals. When the batch closes, your terminals are told at once, so a terminal does not close it a second time.

Close batch on the terminal: when Electronic Payments turns it on, the Reports screen has a Close batch box so you close the batch yourself, for example a restaurant after the night's tips are adjusted. The automatic close still runs at its time if the batch is still open.

The box reads Checking the batch..., then Open batch: 12 transactions, net $845.20 with the Batch number, or No open batch on this terminal. Refresh reads it again. If it shows Could not read the batch. Check the connection and try again., check the network.

On this screenWhat it does
Auto-close batchMerchant360 closes the batch every day at the batch close time, terminals on or off. On by default. Electronic Payments.
Batch close timeHalf-hour times in your local time; 11:00 PM by default. Electronic Payments.
Close batch on the terminalTurns on the Batch tile on the Main Menu and shows the Close batch box on the Reports screen. Off by default. Electronic Payments.
Open batch: N transactions, net $XThis terminal's open batch.
No open batch on this terminal.Nothing to close.
RefreshReads the open batch again.
Close batchAsks to confirm, then closes the batch. Off while there is no open batch.
Tip
Before closing: in History, use the Untipped Transactions filter to find card sales still waiting for a tip, add each with Tip Adjustment, then close the batch.
Important
Once a batch closes, its tips cannot be adjusted and its sales cannot be voided, only refunded.

Close the batch on the terminal

Open Close batch from the Batch tile on the Main Menu, beside Settings (terminal app 2.47.31), or from Reports. The Batch tile is gray when Close batch on the terminal is off. Logout is beside About.

Before you start
  • Close batch on the terminal is on for your account (Electronic Payments turns it on).
  • Every tip that needs adding is added with Tip adjustment.
  1. 1Adjust every tip still to add (History → the sale → Tip Adjustment).
  2. 2Main Menu → Reports.
  3. 3Check the Open batch line in the Close batch box; press Refresh if needed.
  4. 4Press Close batch, then Close batch again on the confirmation.
  5. 5Enter the supervisor PIN if asked, and read the result. The Batch Close Report prints when that setting is on.
Good to know

Close batch asks Close the batch? with the open batch line and After the close, tips cannot be adjusted and sales cannot be voided, only refunded. Cancel leaves it open. Close batch asks for the supervisor PIN when Void is protected, then closes the batch.

The result shows in the box: Batch 123 closed., Batch closed., The batch was already closed., or The batch was not closed: with the reason. Merchant360 could not be reached. means the terminal had no connection; the batch is still open.

Batch close report (terminal app 2.42.27): after the close, the terminal prints a Batch Close Report when Print a report after Close batch is on (on by default). It has the card totals of the batch on this terminal (credit, debit and other card counts and amounts, refunds, voids, tips, tax, fees and the overall amount), the Batch number, From (the previous close, or the start of the day) and Closed times, and the Transactions and Net the processor reported for the open batch. A terminal without a printer skips it. If it does not print, the box shows The batch report did not print: with the reason; the batch is closed either way, and Reports → Credit / Debit Card Reports → Totals prints the same totals for the day.

When Merchant360 closes the batch (at the Batch close time, or with Close batch in Merchant360 or ISO360), the terminal is told at once; a terminal that was off catches up when it is next on (terminal app 2.42.32). Reports shows the new batch, and in History the card sales from the closed batch offer Refund instead of Void. With Print a report after Close batch on, your default terminal prints the Batch Close Report, once per batch. Close batch on a batch that is already closed or has no transactions shows The batch was already closed. and sends nothing.

With that setting on, if the terminal that prints the report was off at the close, it prints the Batch Close Report when it is back on and connected (app 2.43.10). Each report prints once, even if the terminal is told about the close more than once.

On this screenWhat it does
Close the batch?The confirmation with the open batch line and what a close ends.
CancelLeaves the batch open.
Close batch (confirmation)Closes the batch, after the supervisor PIN when Void is protected.
Batch N closed. / Batch closed.The batch closed.
The batch was already closed.It closed before, for example at the automatic close time.
The batch was not closed:The reason follows. The batch is still open.
If something goes wrong
The batch was not closed: Merchant360 could not be reached.
The terminal had no connection and the batch is still open. Check the connection and press Close batch again.
The batch was already closed.
Merchant360 already closed it, or it had no transactions. Nothing more to do.
The batch report did not print
The batch is closed either way. Reports → Credit / Debit Card Reports → Totals Only prints the same totals for the day.

Settings and help

Every setting, the connection checks and the messages the terminal can show.

Terminal settings

Main Menu → Settings asks for the supervisor PIN (4 digits, set by Electronic Payments) and shows only what you can change. When no supervisor PIN is set for your business, Settings opens without one.

The rows: Cash and sale prompts, Tips, Sales tax, Loyalty, Receipts and printing (business settings, shown while the terminal is connected to Merchant360; otherwise the page says Connect to Merchant360 to change tips, sales tax and receipts here), Mode, currency and language, This terminal, Training mode, Connect to Merchant360, Wi-Fi, Check connection, Sound, and Exit to Android (for Electronic Payments technicians, on a locked terminal).

Rows that show only when they apply: Appointments on the terminal (Cash and sale prompts, when Scheduling is on); Show offers on the terminal and Reward slip for a free item (Loyalty, while Ask for loyalty phone is on; the reward slip on terminals with a printer); Go straight to the receipt prompt (Receipts and printing, while Receipts is on) and No customer copy returns to sale (under Customer copy, when it is on Prompt).

A switch or a choice saves at once; a number or a text opens an entry page with Save. The page then says Saved. With no network, the change applies on the terminal right away, the page says Saved on this terminal. It is sent when the terminal is online., and it goes to Merchant360 when the terminal is back online. This value was not accepted. means the value is outside its range.

Business settings (prompts, tips, tax, loyalty, receipt text and sizes) apply to every terminal of your business. Mode, currency, language, start screen, receipt copies, print declined transactions and the daily report belong to the terminal they are changed on.

You can also change these settings from Merchant360: Tools, Settings, Terminal settings, on its own page next to Billing settings (managers and owners). A change there applies to all your terminals at once, including the terminal-only ones, and the terminal and Merchant360 always show the same values. Price changes on the terminal is set only in Merchant360 Terminal settings, not on the terminal.

Amount limits, the pricing program, transaction types, which actions need the PIN, the order of the receipt header lines, the batch close and the signature rules are set by Electronic Payments and are not shown on the terminal.

Level II: every card sale sends the invoice number and the tax amount to the processor, with no prompt.

Screen sleep and Screen brightness (Merchant360 Terminal settings, Device): the screen stays on by default (Never), so the terminal is lit and ready for a sale whether or not it is charging. Brightness is 100% by default.

Times on receipts and reports are your business's local time, from the time zone under Account, Business (set from your business address; the owner can change it).

Terminals without a printer (PAX A77 and A800): the app shows no print buttons and does not ask to print. After a sale, Email receipt and Text receipt are always offered. Settings shows Receipts in place of Receipts and printing, with the footer message, and the daily report is on screen in Reports. The reward slip for a free item does not print. The terminal model comes from your terminal record, so nothing has to be set.

Terminals with a customer screen (PAX A8700 and A960): the screen facing the customer shows Welcome and your business name, the amount as it is keyed (the card price and the cash price when cash has its own price, with dual pricing or cash discount), the tip buttons on a PAX A8700 (the customer taps a suggestion, No Tip or Other amount, which opens a keypad on the customer screen; the clerk's screen says the customer is choosing, with Choose here and Cancel sale), a green Pay $X Cash Instead bar under the two prices and while the card is asked for, when your account has it on (a tap takes the sale as cash), Tap, insert or swipe your card, then Approved or Declined, and Thank you.

Settings: Cash and sale prompts, Tips, Sales tax, Loyalty, Receipts and printing, Mode, currency and language, This terminal
Settings, top: the business settings, Mode, currency and language, and This terminal.
Settings, further down: the Training mode switch, Connect to Merchant360, Wi-Fi, Check connection, Sound and Exit to Android
Settings, further down: Training mode, Connect to Merchant360, Wi-Fi, Check connection, Sound and Exit to Android.
Cash and sale prompts: Take cash, Ask for cash tendered, Text to pay, Ask for an invoice number
Cash and sale prompts: cash, cash tendered, Text to pay and the invoice number.
Cash and sale prompts, further down: Made by the terminal, Keyed by the clerk, Allow a blank invoice number, Ask for a clerk ID, Clerk ID, Server ID, Operator ID, Allow a blank clerk ID
Invoice number entry and the clerk ID prompt with its label.
Tips: Ask for a tip, Where the tip is added with On screen and On the receipt
Tips: the prompt and where the tip is added.
Tips, further down: Show tip suggestions, Suggestion 1 to 4 at 15%, 18%, 20% and 25%, Maximum tip 50%
Tip suggestions and the maximum tip.
Sales tax: Add sales tax to each sale, Sales tax rate 8.75%, Allow tax bypass
Sales tax.
Loyalty: Ask for loyalty phone, Text receipt phone joins loyalty, Loyalty QR on the receipt
Loyalty.
Receipts and printing: Receipts, and Customer Copy with Auto, Prompt and No Print
Receipts and printing: receipts on or off and the customer copy.
Receipts and printing, further down: Merchant Copy, Print Failed Transaction, Print the daily report and Print time 11:00 PM
The merchant copy, declined receipts and the daily report.
Receipt text: Footer message Thank you, Header, Body and Footer size 100%, Header style
Receipt text: footer message, sizes and styles.
Mode, currency and language: Standalone and Integrated, Start screen with Sale keypad and Items
Mode and start screen.
Currency with the warning that it must match the processing account, US dollar, Canadian dollar, British pound and Euro with a sample amount
Currency.
Language: English, Español, Français, Deutsch, Italiano, Português, Nederlands
Language.
This terminal: Merchant Name, Merchant ID (MID), Terminal ID (TID), Serial number, Model, App version
This terminal: details for support.
This terminal, further down: Settings from Merchant360, Last settings check, Last changed, Sync settings from Merchant360 now and Test print
Where the settings come from, Sync settings from Merchant360 now and Test print.
Merchant360 Terminal settings page: Terminal mode, Currency, Language, Ask for loyalty phone, Text receipt phone joins loyalty
The same settings in Merchant360: Tools, Settings, Terminal settings.
On this screenWhat it does
Cash and sale promptsTake cash and Ask for cash tendered; Text to pay; Ask for an invoice number (Made by the terminal or Keyed by the clerk, Allow a blank invoice number); Ask for a clerk ID (Clerk ID, Server ID or Operator ID, Allow a blank clerk ID); Appointments on the terminal when Scheduling is on.
TipsAsk for a tip, Where the tip is added (On screen or On the receipt), Show tip suggestions (up to 4 percents) and Maximum tip.
Sales taxAdd sales tax to each sale, Sales tax rate (0% to 50%, two decimals; the same rate your invoices use) and Allow tax bypass.
LoyaltyAsk for loyalty phone (with Show offers on the terminal and Reward slip for a free item while it is on), Text receipt phone joins loyalty, and Loyalty QR on the receipt. The loyalty program is off. when your program is off in Marketing.
Receipts and printingTest print at the top (prints the test receipt with your current receipt settings, app 2.43.24); Receipts on or off; Go straight to the receipt prompt; Customer Copy (with No customer copy returns to sale on Prompt) and Merchant Copy (Auto, Prompt, No Print); Print Failed Transaction; Print the daily report and Print time; Print items on the receipt; Footer message; Header, Body and Footer size (50% to 200%); Header style and Footer style (Bold, Italic, Underline); Logo on receipts and Logo on screen. Called Receipts on a terminal without a printer: receipts on or off and the footer message.
Mode, currency and languageStandalone, Integrated or POS Listener; Start screen (Sale keypad or Items) when items are set up; Currency; Language.
This terminalMerchant Name, Merchant ID (MID), Terminal ID (TID), Serial number, Model, App version, Settings from, Last settings check and Last changed. Sync settings from Merchant360 now (Settings updated from Merchant360. or Settings are up to date.) and Test print (prints TEST PRINT) on a terminal with a printer.
Training modePractice with no card charged. See Training mode.
Connect to Merchant360Connects the terminal with an activation code.
Wi-FiOpens the Android Wi-Fi panel over the app.
Check connectionTests the network, VPN, internet, Merchant360, the account and the card reader.
SoundOpens the Android volume panel over the app.
Exit to AndroidFor Electronic Payments technicians: needs their PIN. Shown on a locked terminal. The side scan key on the PAX A920 Max does nothing while the Payment App is on screen (app 2.43.26).

Settings reference

Every setting of the Merchant360 Terminal, with its choices, its default and where it is changed. Terminal: on the terminal under Settings (supervisor PIN). Merchant360: Tools → Settings → Terminal settings. Electronic Payments: set by Electronic Payments or your sales office; ask them to change it.

A setting that depends on another (for example the tip percentages on Ask for a tip) shows only while the one it depends on is on.

Per terminal: Terminal mode, Accept sales from the PC, Currency, Language, Start screen, Customer copy, Merchant copy, Go straight to the receipt prompt, No customer copy returns to sale, Print declined transactions, Print the daily report and its time, the screen idle timer, and the supervisor PIN when one is set for a single terminal. Every other setting is the same on all terminals of your business; the pricing program and the batch close are always the same on all of them.

Keyed sales and batch close (terminal app 2.42.28), set by Electronic Payments, the same on all terminals: Require CVV on keyed sales (default on), Require AVS (ZIP and street number) on keyed sales (default on; it also shows the Zip Code and Street/PO Box # boxes), Confirm screen before a keyed sale (default off; on a surcharge program, Surcharge confirmation screen also shows it) and Print a report after Close batch (default on; needs Close batch on the terminal). The first three need keyed entry (MOTO) on. Surcharge confirmation screen (default off, with the surcharge program) adds the confirm screen with the surcharge to card sales (Confirm Sale) and keyed sales (Confirm Keyed Sale, Confirm Keyed Pre-Auth).

POS Listener (terminal app 2.43.0), per terminal, none changed on the terminal: Cancel button on the terminal (default on; your POS can turn it on or off for one sale), Waiting screen message (default Ready for Payment, up to 40 characters; Merchant360 and Electronic Payments; needs POS Listener mode). Your software partner sets where its logo shows. Key enter card is not a setting: only your POS turns it on, for one sale, and it needs keyed entry (MOTO) on.

Settings, Loyalty: Ask for loyalty phone, Text receipt phone joins loyalty and Loyalty QR on the receipt
Settings → Loyalty on the terminal.
On this screenWhat it does
Terminal modeStandalone, Integrated or POS Listener. Default Standalone. Per terminal. Terminal and Merchant360.
Cancel button on the terminalCancel Sale on a sale sent from your POS or Merchant360. On by default. Per terminal. Your POS can turn it on or off for one sale. Electronic Payments.
Waiting screen messageThe POS Listener message, up to 40 characters. Default Ready for Payment. Per terminal. Needs POS Listener mode. Merchant360 and Electronic Payments.
Key enter cardNot a setting. Only your POS turns it on, for one sale; needs keyed entry (MOTO) on.
Accept sales from the PCSales sent from the Merchant360 Chrome extension or API open on the terminal. On by default. Per terminal. Electronic Payments.
CurrencyUS dollar, Canadian dollar, British pound or Euro; must match your processing account. Default US dollar. Per terminal. Terminal and Merchant360.
LanguageEnglish, Español, Français, Deutsch, Italiano, Português, Nederlands. Default English. Per terminal. Terminal and Merchant360.
Start screenSale keypad or Items, when items are set up. Default Sale keypad. Per terminal. Terminal and Merchant360.
Items on the terminalUp to 96 places on the grid (8 per page): items from your inventory and blank spaces between groups, in grid order. Electronic Payments sets the order (or sorts A to Z); names and prices come from Inventory.
Print items on the receiptEach item above the subtotal. On by default. Terminal and Merchant360.
Take cashThe Cash tender. On by default. Terminal and Merchant360.
Ask for cash tenderedThe Cash tendered step with change due. On by default. Terminal and Merchant360.
Quick amount completes the cash saleOn Cash tendered, a tap on Exact or a quick amount completes the sale without Continue. Off by default. Needs Ask for cash tendered. Merchant360.
Pay Cash Instead on the customer screenA green Pay $X Cash Instead bar on the A8700 customer screen, under the card and cash prices and while the card is asked for. A tap takes the sale as cash. Off by default. Set in ISO360.
Text to payThe Text tender. Off by default. Terminal and Merchant360. The link goes by text or by email (app 2.43.19). After Send, the terminal waits and shows Paid, or Bank payment authorized; Done leaves at any time and the invoice stays in Invoices.
Pay by bankOn the Text to pay screen: Bank only sends a link where the customer pays from their bank (Plaid sign-in, or routing and account number) and accepts the ACH authorization on their phone. The bank is saved to the customer. The terminal shows Bank payment authorized; the money settles in a few business days. Print receipt then prints a slip with the amount, invoice number and date (app 2.43.20; also for a link paid by card). Needs ACH turned on for your account. Off by default (app 2.43.19).
Ask for an invoice numberAn invoice number on each card sale. Off by default (the terminal still numbers each sale). Terminal and Merchant360.
Invoice number: Made by the terminal / Keyed by the clerkWho makes the number. Default Made by the terminal. Terminal and Merchant360.
Allow a blank invoice numberKeyed by the clerk only: Continue with no number. Off by default. Terminal and Merchant360.
Ask for a clerk IDThe clerk or server ID prompt. Off by default. Terminal and Merchant360.
Clerk prompt labelClerk ID, Server ID or Operator ID, on the prompt, the receipt and the report filter. Default Clerk ID. Terminal and Merchant360.
Allow a blank clerk IDContinue with no ID. Off by default. Terminal and Merchant360.
Ask for a tipThe tip on card sales. Terminal and Merchant360.
Where the tip is addedOn screen or On the receipt. Default On screen. Terminal and Merchant360.
Show tip suggestionsOn by default. Terminal and Merchant360.
Tip suggestionsUp to 4 whole percents, for example 15, 18, 20, 25. Terminal and Merchant360.
Maximum tipPercent of the sale. Default 50%. Terminal and Merchant360.
Add sales tax to each saleApplies your tax rate to each sale. Terminal and Merchant360.
Sales tax rate0% to 50%, two decimals; your business's rate, also used by invoices. Terminal and Merchant360.
Allow tax bypassBypass Tax in the gear drawer. Off by default. Terminal and Merchant360.
Pricing programNone, Surcharge, Dual Pricing, Cash Discount or Admin Fee, from your fee program enrollment. Same on every terminal. Electronic Payments.
Surcharge rateYour enrolled rate, up to 3%, on credit cards only; debit and prepaid are never surcharged. Electronic Payments.
Surcharge applies to taxThe surcharge is figured on the taxed total. On by default. Electronic Payments.
Surcharge applies to tipThe surcharge is figured on the tip too. Off by default. Electronic Payments.
Surcharge confirmation screenCard sales stop on Confirm Sale showing the surcharge. Off by default. Electronic Payments.
Surcharge receipt messagePrinted on receipts; default A surcharge applies to credit card payments only. Electronic Payments.
Cash discount receipt messagePrinted on receipts; default Pay with cash to receive the cash discount. Electronic Payments.
Admin feeA fee on every tender, a fixed amount or a percent, with the name printed (default Admin Fee). Optional: ask before adding it, include the tip, include the tax. Off by default. Electronic Payments.
Allow fee bypassWaive Fee in the gear drawer. Off by default. Electronic Payments.
Minimum sale / Maximum saleFrom your Fraud tools limits. Electronic Payments.
Partial approvalA card short of the total can be approved for part of it. From your account settings. Electronic Payments.
Pre-authPre-Auth and Keyed Pre-Auth on the menu. Off by default. Electronic Payments.
Pre-auth decrementDecrement Pre-Auth. On by default. Electronic Payments.
Minimum pre-auth / Maximum pre-authNo limit by default. Electronic Payments.
Pre-auth expiryDays an open pre-auth can be completed. Default 7, up to 30. Electronic Payments.
Keyed entry (MOTO)Keyed Sale and Keyed Pre-Auth. Off by default. Electronic Payments.
AVS on keyed salesAsks for the billing street and ZIP code on keyed sales. On by default. Electronic Payments.
Save customer on keyed salesBefore a keyed sale the terminal asks for the customer's first and last name and an email or mobile number (Skip runs the sale without saving). The card is saved on that customer in Customers for later charges. The security code is never saved. Off by default (app 2.43.19).
VoidVoid Transaction. On by default. Electronic Payments.
Partial voidVoid part of a sale. On by default. Electronic Payments.
RefundsRefund Transaction, Refund and Keyed Refund. On by default. Electronic Payments.
Refund to original card onlyA refund to another card declines. Off by default. Electronic Payments.
Refund without the cardThe Automatic refund button. Off by default. Electronic Payments.
History filtersThe filter chips in History. On by default. Electronic Payments.
PIN debit / EBTDebit and EBT buttons. Off by default. Electronic Payments.
Store and forwardStores card sales while offline. Off by default. Largest stored sale $100.00 and Most stored at once $500.00 by default. Electronic Payments.
Duplicate checkRefuses the same amount on the same card within a short window. On by default. Electronic Payments.
PIN bypassThe cardholder can skip PIN entry. Off by default. Electronic Payments.
Gift cards on the terminalGift Card on the menu and the Pay screen, when your gift card program is on. On by default. Electronic Payments.
Gift card partial approvalA short gift card pays what it holds. On by default. Electronic Payments.
Loyalty on the terminalThe terminal offers your loyalty program. On by default. Electronic Payments.
Ask for loyalty phoneThe Loyalty page before payment. Off by default. Terminal and Merchant360.
Show offers on the terminalPoints rewards on the Loyalty page. On by default. Terminal (Loyalty, while Ask for loyalty phone is on) and Merchant360.
Reward slip for a free itemOff, Separate slip or On the receipt. Default Off. Terminals with a printer. Terminal (Loyalty, while Ask for loyalty phone is on) and Merchant360.
Text receipt phone joins loyaltyOn by default. Terminal and Merchant360.
Loyalty summary on the receiptOn by default. ISO360 only.
Loyalty QR on the receiptOff by default. Terminal and Merchant360.
Appointments on the terminalAppointments on the menu, when Scheduling is set up. On by default. Terminal (Cash and sale prompts) and Merchant360.
Price changes on the terminalOff, With supervisor PIN or Allowed. Default Off. Merchant360.
ReceiptsOff: no receipt prints and no email or text receipt is offered. On by default. Terminal and Merchant360.
Customer copyAuto, Prompt or No Print. Default Prompt. Per terminal. Terminal and Merchant360.
Merchant copyAuto, Prompt or No Print. Default No Print. Per terminal. Terminal and Merchant360.
Go straight to the receipt promptAn approved card sale skips the details screen. On by default. Per terminal. Terminal (Receipts and printing) and Merchant360.
No customer copy returns to saleNo on the customer copy question returns to the sale screen; shown when the customer copy is on Prompt. On by default. Per terminal. Terminal (Receipts and printing) and Merchant360.
Print declined transactionsOff by default. Per terminal. Terminal and Merchant360.
Digital receiptEmail, SMS, Both or Neither. Default Both. Electronic Payments.
Signature on screenOff, Always or From amount. Default Off. Electronic Payments.
Signature line on receiptEvery card sale, or from an amount. Off by default. Electronic Payments.
Header line orderName, address, phone, website, email. Default name, address, phone. Electronic Payments; the details come from your business record.
Header size / Body size / Footer size50% to 200%. Default 100%. Terminal and Merchant360.
Header style / Footer styleBold, Italic, Underline. Default header Bold. Terminal and Merchant360.
Footer messageUp to 280 characters, on printed, email and text receipts. Default Thank you. Terminal and Merchant360.
Merchant logo at the top of receiptsYour Business Profile logo above your name and address. Off, or no logo: the receipt starts with your name and address (app 2.43.18).
Merchant360 or agent logo at the bottom of receiptsA smaller logo above the copy line: your agent's logo when your agent has branding (only your agent changes it then), else the Merchant360 logo. On by default.
Digital receipt QRA QR code on the customer copy. The customer scans it to see the receipt online: items, tax, total, payment (card last 4 only), date. View only; it cannot send the receipt anywhere. With a loyalty program, the rewards sign-up shows under the receipt. Off by default.
Logo on screenYour Business Profile logo. On by default. Terminal and Merchant360. On screen, your logo takes the place of the Merchant360 logo. When your agent has branding, the agent's logo shows instead (app 2.43.17). A new logo reaches the terminal at its next settings check.
Merchant360 logo with your logoOff by default. Electronic Payments.
Auto-close batch / Batch close timeOn, 11:00 PM by default. Same on every terminal. Electronic Payments.
Close batch on the terminalOff by default. Electronic Payments.
Print the daily report / Print timeOff, 11:00 PM by default. Per terminal. Terminal and Merchant360.
Supervisor PIN4 digits, for the business or one terminal. Electronic Payments.
Supervisor PIN required forSale, MOTO Sale, Pre-auth, MOTO Pre-auth, Completion, Refund, Void. Default Refund and Void. Electronic Payments.
Screen idle timerThe screen dims after this many seconds without a touch; a touch brings it back. Per terminal. Electronic Payments.
Lock terminal to Merchant360The terminal opens only the Payment App. On by default. Per terminal. Electronic Payments.
Fuel and fleetFuel, Service or Sale screen (on), Back to it after 10 seconds, fuel grades and services sold, Ask Visa Fleet or Other (on) and the Visa Fleet prompts. Electronic Payments.
Report typesWhich reports the card, cash and gift card report menus offer. Default all: card and gift card Short, Journal, Condensed, Tip, Totals Only and Tax Only; cash the same without Tip. Electronic Payments.

Check connection, Wi-Fi and Sound

Settings → Check connection tests what card payments need and shows each line: Network (Wi-Fi with the signal out of 4, Mobile data, Ethernet, or Not connected), VPN (Off, or On. Turn it off for card payments.), Internet (8.8.8.8), Merchant360 (Reachable with the time in ms, or No reply), Merchant360 account (connected or Not connected), Card reader (Ready, Card reader starting, or Not started) and Card payments (Ready, Internet Offline - NI or Internet Offline - SR). Ready for card payments. means every line passed. Check again runs it again.

Settings → Wi-Fi opens the Android Wi-Fi panel over the app: pick a network and enter its password. It closes back to the app. No technician PIN is needed.

Settings → Sound opens the Android volume panel over the app (media, ring, notification and alarm volume).

Check connection: the status line Internet Offline - SR, Network Wi-Fi signal 4 of 4, VPN Off, Internet (8.8.8.8) Reachable 47 ms, Merchant360 Reachable, the Merchant360 account, the card reader rows and Check again
Check connection: each line, with the status at the top.
On this screenWhat it does
NetworkWi-Fi, signal N of 4; Mobile data; Ethernet; VPN only. Turn off the VPN.; or Not connected.
VPNOff, or On. Turn it off for card payments.
Internet (8.8.8.8)Reachable with the time in ms, or No reply.
Merchant360Reachable with the time in ms, or No reply.
Merchant360 accountThe business the terminal is connected to, or Not connected.
Card readerReady, Card reader starting or Not started.
Card paymentsReady, Internet Offline - NI or Internet Offline - SR.
Check againRuns every check again.
Wi-FiThe Android Wi-Fi panel: networks and password.
SoundThe Android volume panel.

About screen

Main Menu → About shows the app version installed on the terminal. When your provider's brand is set for your terminal, their logo shows in place of the Merchant360 logo on every screen, and About shows their name and contact details: Phone, Email, Website and Address.

Give the version (also under Settings → This terminal → App version) to support when you call.

New versions of the Payment App come through PAXSTORE. Before PAXSTORE installs one, it asks the app, and the app answers not now while a payment screen is open (the card screen, cash, the receipt, a void, a refund, a tip adjustment or a pre-auth completion), for up to 30 minutes, and while sales wait to be sent to Merchant360 (offline card sales, cash sales, loyalty and stock), for up to 2 hours (app 2.43.6). After those limits the app no longer holds the update back.

An update keeps the app's data: sales still waiting to be sent stay on the terminal and go out after the update. Card sales are kept by the processor, so an update does not lose a batch.

The About screen with the Merchant360 logo, Merchant360 Payment App and the version
About: the app version on this terminal.
On this screenWhat it does
VersionThe app version on the terminal.
Phone / Email / Website / AddressYour provider's contact details, when their brand is set.

Languages and currencies

The terminal's screens and receipts come in English, Spanish, French, German, Italian, Portuguese and Dutch. Amounts show in US dollars, Canadian dollars, British pounds or euros, each in its own format: $2,399.33, £2,399.33 or 2.399,33 €.

Language and currency are chosen on the terminal under Settings, Mode, currency and language (supervisor PIN), or in Merchant360 Terminal settings, and can also be set by Electronic Payments. Each language is listed in its own name. A change on the terminal applies at once; a language change returns to the start screen in the new language.

Item names come from your inventory and show as you entered them, in any language.

The currency list with US dollar, Canadian dollar, British pound and Euro, each with an example amount
Currencies, each shown with an example amount: $2,399.33, £2,399.33, 2.399,33 €.
The language list: English, Español, Français, Deutsch, Italiano, Português, Nederlands
Seven languages for screens and receipts.
The Pay screen in Spanish with US dollars: Pagar, Tarjeta, Efectivo
Spanish, US dollars.
The Pay screen in German with euros: Bezahlen, Karte, Bargeld, 16,75 €
German, euros: 16,75 €.
The Main Menu in French
French: the Main Menu.
The Pay screen in English with British pounds
English, British pounds: £16.75.
On this screenWhat it does
CurrencyUS dollar, Canadian dollar, British pound, Euro, each with an example amount.
LanguageEnglish, Español, Français, Deutsch, Italiano, Português, Nederlands.
Tip
The currency must match the currency of your processing account. A terminal set to euros on a US dollar account will see its sales declined.

Training mode

Training mode is for practice and demonstrations. Turn it on in Settings > Training mode (supervisor PIN). It is set on the terminal only.

While it is on, an orange TRAINING MODE banner (No card is charged) shows across the top of every screen, and printed receipts say *** TRAINING *** and NO CARD WAS CHARGED at the top and bottom.

Every card sale, refund, void, pre-auth and tip adjustment is approved without reading a card, and no card is charged. Cash sales work as usual. Nothing fails, and the terminal works without internet.

Training sales show in History and Reports only while Training mode is on; your real sales are hidden until you turn it off. Training sales are never sent to Merchant360.

Gift cards, appointments, Text to pay, loyalty and sales sent from the PC are off in Training mode. Email and text receipts are not sent.

Turn Training mode off before taking real payments.

The Sale screen with the orange TRAINING MODE banner across the top
Training mode: the banner shows on every screen.
On this screenWhat it does
Training mode (Settings)On: every card operation is approved with no card charged. Terminal only.
TRAINING MODE bannerShows on every screen while it is on.

Messages that need attention

approved transaction(s) recovered to History: the app closed after an approval; the sale is now in History.

1 transaction needs review. Tap to see. (a banner): an approved void, completion or tip adjustment was not saved on the terminal. Tap the banner, record it in Merchant360 against the original sale, then press Mark reviewed.

Outcome unknown: no final result came back while a card was being processed. Check the terminal batch or Merchant360 before running the card again, then press I checked.

Internet Offline - NI: the terminal has no network. Internet Offline - SR: the card reader could not reach the processor. The card was not charged. Check Settings → Check connection.

The card reader is getting ready. Tap Retry in a moment.: the reader is starting; Setting up card reader, restarting... shows while the app restarts the reader after setup.

Couldn't load settings: the terminal could not load its settings at start. Check the network and press Retry. Your terminal is missing required setup: lists what Electronic Payments has to complete (for example the Terminal ID); contact support.

This terminal is not connected to Merchant360. Go to Settings, then Connect to Merchant360.: gift cards, appointments, Text to pay and settings changes need the connection.

No answer from Merchant360. Check the card balance before you try again.: a gift card action got no answer.

Something went wrong with RESTART: the app hit an error. Tap RESTART to continue; if it happens again, contact support.

Checking the outcome: when a card operation got no final result (the app closed, or the reader timed out), the terminal asks the processor for that transaction's status. An approved sale is recorded in History (marked recovered); a declined or cancelled one shows that the card was not charged. If the processor has no final answer yet, the message stays with Check again and I checked. Voids, completions and tip adjustments are never recorded automatically: the checked status shows so you can confirm them.

On this screenWhat it does
Transactions to reviewThe list behind the banner, with Close.
Mark reviewedThe approved action is recorded in Merchant360.
I checkedYou checked the terminal batch or Merchant360 for a sale with an unknown outcome.
Retry (Couldn't load settings)Tries to load the settings again.
RESTARTRestarts the app after an error.

The terminal in other tools

The terminal takes sales from other Merchant360 tools in either mode. The payment extension for Chrome and Edge shows Send to card terminal when your account has a terminal, so a sale started in another program goes to the terminal. The embedded terminal has a device mode that sends the charge to a terminal. Mindbody sales show Charge on terminal. The Merchant360 API sends a sale to a chosen terminal or to the default terminal.

The payment extension: Card terminal, $342.50, Send to terminal, and Waiting for the terminal
The payment extension sends the amount to the terminal.
On this screenWhat it does
Send to card terminal (payment extension)Sends the amount from the extension to the terminal.
Device mode (embedded terminal)The embedded terminal sends the charge to a terminal the staff member picks.
Charge on terminal (Mindbody)Sends a Mindbody sale to the terminal.
Merchant360 APISends a sale to a chosen terminal, or to the default terminal.