Browse the guide

Vendor & contractor payments

Pay the people you owe, keep their W-9s, and roll up 1099-NECs.

What it is

Vendor payments is the money-out side of Merchant360. Keep a list of the vendors and contractors you pay, store each one's W-9, check their tax ID with the IRS, record what you pay them, and download the 1099-NEC recipient copies at tax time. Each recorded payment is also booked as a Contractor expense on your Profit & loss.

Who it's for

Business owners who pay freelancers, contractors, landlords or service vendors and need clean 1099-NEC totals. The page is for the account owner.

Before you start
  • You are signed in as the account owner. Team logins do not see Vendor payments.
  • The vendor's W-9, or at least their legal name, address and tax ID (TIN or EIN). You can add a payee without the tax ID and fill it in later.
  • Optional: the vendor's routing and account number, if you want to pay them by bank (ACH) from Merchant360.
On this page

Set up your payees

Add the people you pay, collect their W-9 and check their tax ID.

What are vendor payments?

Vendor payments is the money-out side of Merchant360: a place to track the vendors and contractors you pay, keep each one's W-9 on file, and have the year's totals roll straight into a 1099-NEC at tax time. It is the mirror image of invoicing, where you get paid.

Steps
  1. 1Open the Accept Payments menu and click Vendor payments (under Bookkeeping).
  2. 2Read the three tiles at the top: Payees, Paid in (this year), and 1099-NEC due, the payees at or over $600 this year. Click a tile to jump to its list.
  3. 3Each payee row shows the name and type, the last four of the TIN with its IRS check result, the total paid this year, and a 1099-NEC badge once the payee reaches $600.
    The Vendor payments page with the Payees, Paid in and 1099-NEC due tiles and one payee row with a MATCH badge
    The tiles, a payee row with its TIN check, and the 1099-NEC forms panel.
  4. 4Use the buttons at the end of each row: Record, W-9, Verify, and the archive icon. Bank feed and Profit & loss are the tabs next to Vendor payments.
Good to know

Find it at Accept Payments → Vendor payments. The top of the page shows three numbers at a glance: how many payees you have, how much you have paid them this year, and how many are at or over the $600 IRS threshold that triggers a 1099-NEC.

Use it for anyone you pay who is not an employee: freelancers, contractors, landlords, service vendors. There is nothing to set up first. Add a payee, record what you pay them, and the totals, the W-9, and the 1099-NEC take care of themselves.

Done looks like this: every contractor you pay is a row in the payee list with a TIN and a W-9, Paid in this year matches your checkbook, and in January the 1099-NEC forms panel lists exactly who needs a form.

If a payee shows unverified, no TIN, or needs W-9 on their row, that is the to-do list for a clean tax season. If the 1099-NEC due count looks wrong, check that each payment was recorded with Counts toward 1099 set correctly and that corporations you do not file for have the 1099 vendor flag off.

On this screenWhat it does
Payees / Paid in (year) / 1099-NEC dueThe three tiles. 1099-NEC due counts payees at or over $600 this year.
Add payeeOpens the New payee form.
Payee / TIN / Paid in (year) / 1099 columnsEach payee with their tax ID status, this year's total, and whether a 1099 is due.
Row badges: unverified / no TIN / under $600 / needs W-9What is still missing for that payee before a 1099 can be filed.
RecordRecords a payment you already made to that payee.
Pay by bankSends an ACH payout to the payee's bank, when enabled on your account.
W-9 / W-9 on file – downloadCollects or downloads the payee's W-9.
VerifyRuns the IRS TIN Match on the payee's name and TIN.
ArchiveHides a payee you no longer use. Their payment history is kept.
1099-NEC formsThe panel at the bottom with a tax year picker and a download per payee paid $600 or more.
Tip
Recording a payment here does not move money. It books the expense and counts it toward the 1099. To send the money from Merchant360, see Pay a vendor by bank (ACH).

Add a payee

A payee is anyone you pay who might need a 1099-NEC: a freelancer, a contractor, a landlord, a service vendor. Add them once and every payment you record rolls up under them.

Steps
  1. 1On Vendor payments, click Add payee. The New payee form opens.
    The New payee form with Name, Type, Email, TIN / EIN (from W-9), 1099 vendor, address and the optional bank fields
    New payee: name, type, tax ID, address, and an optional bank for ACH payouts.
  2. 2Type the Name as it should print on the 1099, and pick the Type: Business or Individual.
  3. 3Type the Email, and the TIN / EIN (from W-9) if you have it. Leave 1099 vendor ticked for anyone who gets a 1099-NEC; untick it for a payee who never does.
  4. 4Fill in the Address, City, State and ZIP. The 1099-NEC needs the full address.
  5. 5Optional: under Bank for ACH payout, type the Routing and Account numbers and pick Checking or Savings.
  6. 6Click Save payee. The payee shows in the list with the last four of the TIN, or no TIN.
Good to know

Have their W-9 handy if you already collected one, because the legal name and TIN come straight from it. If you plan to pay them by bank, you also need their routing and account numbers.

Done looks like this: the payee is a row in the list with their type, a masked TIN, and a Paid in figure of zero until you record the first payment.

If the save fails, the name is missing or the TIN is not nine digits. If you do not have the TIN yet, save without it, click W-9 to send them a prefilled form, and add the TIN when it comes back. If a payee was added twice, archive the duplicate; its history is kept.

On this screenWhat it does
NameThe vendor or contractor name as it should appear on the 1099.
Type: Individual / BusinessDecides how the name is treated on the W-9 and the 1099.
EmailWhere the prefilled W-9 and the 1099 recipient copy can be sent.
TIN / EIN (from W-9)Nine digits. Encrypted on save; only the last four are shown. The TIN type is EIN for a business or SSN for an individual.
1099 vendorOn for anyone reportable. Off excludes them from the 1099-NEC rollup.
Bank for ACH payout (optional): Routing, Account, Checking / SavingsNeeded only for Pay by bank. Stored encrypted.
Save payee / CancelAdds the payee or discards the form.
Tip
No tax ID yet? Save the payee anyway, then click W-9 on the row to send the vendor a prefilled W-9.
If something goes wrong
Enter the payee's name.
Name is the only required field. Type it and click Save payee again.
Routing number must be exactly 9 digits (got …).
Check the routing number on the vendor's check or bank letter. It is always 9 digits.
That routing number failed its checksum - please re-read the check.
One digit is wrong. Type the routing number again from the check.
Account number must be 4 to 17 digits.
Type the account number again without spaces or dashes.
A payee was added twice
Click the archive icon at the end of the extra row and confirm Archive. Their payment history is kept.

Do this with the API:Vendor Payments

Collect and store a W-9

You need a W-9 on file for anyone you will send a 1099-NEC. Merchant360 both generates one to send and stores the signed copy, encrypted, so you are not chasing paper in January.

Steps
  1. 1On the payee's row, click W-9. The form reads Record W-9 for (payee name).
  2. 2Click Prefilled W-9 to send to download a W-9 with the payee's name and address filled in. Send it to the vendor to sign.
  3. 3When the signed form comes back, fill in Legal name, Business name (optional), Tax classification, TIN type and TIN, the Address, City, State and ZIP, and Signed by (name on the W-9).
    The Record W-9 form with Legal name, Tax classification, TIN type, TIN, address and Signed by fields, and the Prefilled W-9 to send link
    Record W-9: copy the details from the signed form.
  4. 4Click Record W-9. The notice reads W-9 recorded for (name). The payee's name, TIN and address now match the W-9.
  5. 5From then on the row's W-9 link downloads the stored copy (W-9 on file – download).
Good to know

Collect it before the first payment when you can. Done looks like this: the payee's row shows W-9 on file with a download link, and the TIN on the row came from the signed form.

If Record W-9 will not save, the TIN is not nine digits, the signer's name is missing, or the address is incomplete. If the vendor returns a form under a different legal name, enter the name exactly as signed, because that is what the IRS matches against. If you need the stored copy later, click W-9 on file to download it.

On this screenWhat it does
W-9Opens the W-9 panel for that payee.
Prefilled W-9 to sendDownloads a W-9 with the payee's name and address filled in, for them to sign.
Legal name / Business name (optional)The name on the signed form. The legal name is what the IRS matches.
Tax classificationIndividual / Sole proprietor, C Corporation, S Corporation, Partnership, LLC (C corp, S corp, or Partnership), or Other.
TIN type / TINEIN or SSN and the nine digits. Encrypted on save.
Address: Street, City, State, ZIPPrints on the 1099-NEC.
Signed by (name on the W-9)The signer's name as written on the form.
Record W-9Files the signed W-9 encrypted and generates the executed PDF. Confirms with W-9 recorded.
W-9 on file – downloadDownloads the stored copy at any time.
Tip
Collecting the W-9 up front, before you pay someone the first time, is the easiest way to guarantee a clean 1099 season.
Important
Type the legal name exactly as it appears on the signed W-9. The IRS matches the name and TIN together.
If something goes wrong
Enter a 9-digit TIN.
Type the 9 digits of the SSN or EIN from the form. Dashes are fine.
Enter the signer's name.
Type the name exactly as signed on the W-9.
Enter the full address.
Street, City, State and ZIP are all required.
This tax classification files under an EIN. Enter the business's EIN, not an SSN.
Corporations, partnerships and LLCs taxed as one file under an EIN. Pick TIN type EIN and type the EIN from the form.

Verify a payee's TIN (IRS TIN Match)

Before you file a 1099, it is worth confirming the payee's legal name and tax ID actually match IRS records. A wrong name-and-number pairing is the most common reason a 1099 bounces and triggers an IRS B-notice. TIN Match checks the pair against the IRS TIN Matching service for you.

Steps
  1. 1Make sure the payee has a TIN saved. The row shows the last four digits.
  2. 2Click Verify on the row. Merchant360 sends the name and TIN to the IRS TIN Matching service.
  3. 3Read the badge next to the TIN: MATCH (green) means the name and TIN agree with IRS records; MISMATCH (red) means they do not. The notice at the top of the page shows the IRS result in words.
    A payee row with the last four of the TIN and a green MATCH badge
    MATCH next to the TIN.
Good to know

Verify each payee once their TIN is on file, and again after any correction. Done looks like this: the row shows a green MATCH with the date it was checked instead of unverified.

If Verify is disabled with Add a TIN first, save a TIN on the payee. If the result is MISMATCH, compare the legal name and number against the signed W-9 character by character, correct the payee, and verify again. If the check itself cannot run, wait a few minutes and try again.

On this screenWhat it does
Verify / Verify with IRS TIN MatchSends the payee's legal name and TIN to the IRS and shows the result on the row.
Add a TIN firstShown in place of Verify when the payee has no TIN saved.
MATCHThe name and TIN agree with IRS records. Stamped with the date checked.
MISMATCHThey do not agree. Fix the payee against the W-9 and verify again.
unverifiedThe row badge before any check has been run.
Tip
Building on Merchant360? The same check is available as an API call for ISVs (POST /tin-match in the API reference). Ask your EPI rep to enable that scope.
If something goes wrong
Verify is greyed out (Add a TIN first)
The payee has no TIN. Click W-9 and record the signed form, which saves the TIN.
MISMATCH
Compare the legal name and number with the signed W-9 character by character. If no W-9 is on file yet, click W-9 and record it with the exact name and TIN; this replaces them on the payee. Then click Verify again.
Couldn't run the TIN match.
The IRS check did not answer. Wait a few minutes and click Verify again.

Do this with the API:TIN Match

Pay and record

Log payments you made elsewhere, or send the payout by bank.

Record a payment

Recording a payment tells Merchant360 you paid a vendor, whether you sent it by check, cash, bill-pay, or a transfer from your bank. It does two things: it books the amount as a Contractor expense so your Profit & loss stays honest, and it adds to that payee's reportable total for the year.

Steps
  1. 1On the payee's row, click Record. The form reads Record a payment to (payee name).
    Record a payment open under a payee row with Amount, Date, Memo, Counts toward 1099 and the Record button
    Record a payment: amount, date, memo and Counts toward 1099.
  2. 2Type the Amount, check the Date (it is the payment date and sets the tax year), and add a Memo such as May invoice.
  3. 3Leave Counts toward 1099 ticked when the payment is for services. Untick it for amounts that do not go on the 1099.
  4. 4Click Record. The Paid in figure on the row goes up, and the amount is booked as a Contractor expense on your Profit & loss.
Good to know

Record every payment as you make it. Recorded payments flow into your P&L under Bookkeeping, so your expense picture and your 1099 totals always agree.

Done looks like this: the payee's Paid in figure goes up by the amount, and the same amount appears as a Contractor expense on your Profit & loss for that date.

If the amount was reimbursed goods rather than services, untick Counts toward 1099 so it is booked as an expense but not reported. If you recorded the wrong amount, record a second entry for the difference with a memo explaining it. If the P&L does not show it, check the date on the payment falls inside the P&L range.

On this screenWhat it does
RecordOpens Record a payment to that payee.
AmountWhat you paid. Required.
DateWhen you paid it. Sets which P&L period and which tax year it counts in.
MemoWhat it was for, such as May invoice.
Counts toward 1099Ticked adds the amount to the payee's reportable total. Untick for non-reportable amounts.
Record vs Pay by bankRecord books a payment you already made. Pay by bank sends an ACH payout instead.
Tip
Recorded payments flow into your P&L under My Money → Bookkeeping, so your expense picture and your 1099 totals always agree.
If something goes wrong
Enter an amount.
Type an amount above $0.00, then click Record.
Couldn't record the payment.
Try again. If it keeps failing, sign in again and retry.
The payment does not show on the Profit & loss
Check that the payment Date falls inside the From and to dates on Profit & loss.
Related articles

Do this with the API:Vendor Payments

Pay a vendor by bank (ACH)

Recording a payment (above) logs money you already sent. Separately, Merchant360 can also send the payout for you as a bank (ACH) credit, pulling the funds from your account and depositing them to the vendor's, so you do not have to cut a check or leave the app.

Before you start
  • ACH payouts are turned on for your account. Ask your sales rep.
  • The payee has a bank saved under Bank for ACH payout.
  • You are signed in as the account owner.
  1. 1On the payee's row, click Record.
  2. 2Type the Amount and a Memo. The memo travels with the payout.
  3. 3Click Pay by bank. The button shows only when the payee has a bank on file.
  4. 4The notice reads Payout to (name) started – funding, then the vendor is paid once it clears. Your bank is debited first, then the vendor is paid.
Good to know

This is a controlled feature: sending real ACH payouts is turned on per account once the compliance certification is in place. Until then, use Record a payment to keep your books and 1099s accurate for payouts you send by check, cash, or your own bank's bill-pay.

To use it, the payee needs a bank on file (routing, account, and account type) and your account needs payouts enabled. Done looks like this: the confirmation reads Payout to (name) started, your bank is debited to fund it, and the vendor is paid once that clears. The payout is booked as a Contractor expense and counts toward the 1099 like a recorded payment.

If Pay by bank is not offered, ask your sales rep to enable payouts. If it fails with Couldn't send the payout, check the payee's routing and account numbers. If a payout is returned by the vendor's bank, the amount comes back to your account and you can correct the bank details and send again.

On this screenWhat it does
Pay by bankOpens Send an ACH payout to the vendor's bank.
Amount, Date, Memo, Counts toward 1099Same fields as a recorded payment. The memo travels with the payout.
Bank for ACH payoutThe payee's routing and account, set on the payee. Required before Pay by bank works.
Payout startedThe confirmation: funding from your bank first, then the vendor is paid once it clears.
Record vs Pay by bankRecord books a payment you already made as a Contractor expense. Pay by bank sends the ACH payout and books it the same way.
Tip
Want ACH payouts enabled for your account? Ask your sales rep. The payee's bank details are captured (and encrypted) the same way as everywhere else in Merchant360.
Important
Pay by bank sends real money. Check the amount and the payee before you click it. Use Record instead for a payment you already made another way.
If something goes wrong
Vendor ACH payouts aren't enabled yet. You can still record payments you've made another way.
Payouts are not on for your account. Ask your sales rep, and use Record meanwhile.
Only the account owner can send vendor ACH payments.
Sign in as the owner to send the payout.
Your business has no primary bank on file to fund the payout. Contact your account manager.
The payout is funded from your primary bank. Contact your account manager to add it.
Couldn't send the payout.
Check the payee's bank details and try again.

Do this with the API:Vendor Payments

At tax time

Download the 1099-NEC copies for everyone you paid $600 or more.

1099-NEC rollup at tax time

When a payee crosses $600 in reportable payments for the year, they show up in the 1099-NEC forms panel at the bottom of the page, ready to file. Merchant360 adds up every reportable payment you recorded, so there is nothing to tally by hand.

Steps
  1. 1Scroll to 1099-NEC forms at the bottom of Vendor payments, or click the 1099-NEC due tile.
  2. 2Pick the year in the Tax year dropdown. The panel lists every 1099 vendor paid $600 or more that year, with the total and the last four of the TIN.
  3. 3Click 1099-NEC on a row to download the recipient copy, with your business as the payer.
    The 1099-NEC forms panel with a payee, the total paid and the 1099-NEC download link
    1099-NEC forms: one download per payee at or over $600.
  4. 4Send each contractor their copy by the IRS deadline, usually January 31.
Good to know

Work through the panel in January. A payee whose row reads needs W-9 or needs TIN cannot be downloaded until that is fixed, which is why the badges are there all year. Done looks like this: every payee in the panel has a downloaded recipient copy, sent to them by January 31.

If someone you paid over $600 is missing from the panel, either their 1099 vendor flag is off or some payments were recorded without Counts toward 1099. If the total looks low, check for payments recorded with the wrong date, which puts them in the wrong tax year. If a contractor moved, update the address on the payee before you download.

On this screenWhat it does
1099-NEC forms / Tax yearThe panel and its year picker. Lists payees paid $600 or more in that year.
needs (items)What is still missing before the form can be generated, such as a W-9 or a TIN.
Download 1099-NECDownloads the recipient copy with your business as payer and the payee's details filled in.
No payee reached $600Shown when nothing needs to be filed for that year.
Tip
The download is the printable recipient copy. Filing with the IRS (e-file) is not in Merchant360 yet.
If something goes wrong
needs TIN or needs address on a row
The form cannot be built yet. Record the payee's W-9, which saves the TIN and the address.
No payee reached $600 in (year). Nothing to file.
No 1099 vendor was paid $600 or more that year. Check the Tax year, and check that payments were recorded with Counts toward 1099 ticked.
Your business EIN isn't on file – contact your account manager to add it before filing 1099s.
Your own EIN prints as the payer. Contact your account manager to add it, then download again.
Someone you paid over $600 is missing
Their 1099 vendor box was unticked when you added them, or the payments were recorded without Counts toward 1099.

Do this with the API:Vendor Payments

Keep reading
Do this with the API

Developers can do the same with the Merchant360 API.